Hay, can you guys help me out?

Jay 101 · **on:** May 26, 2006, 08:59:06 PM

Hay guys, I've tried the portforward website , but I can't search for HS under the programs and I've tried their method, it dont work for me.

Can you guys help me out?

I'm using 2Wire 1701HG.

I can connect to myself Locally, but my friends can't

If anyone know how to fix this please help me

rejetto · **Reply #1 on:** May 26, 2006, 10:01:49 PM

Quote from: "Jay 101"

I've tried the portforward website , but I can't search for HS under the programs

bad search
http://www.portforward.com/english/routers/port_forwarding/2wire/1701HG/Http_File_Server-HFS.htm

Anonymous · **Reply #2 on:** May 26, 2006, 10:18:12 PM

thanks

trying it

Guest · **Reply #3 on:** July 13, 2006, 04:04:07 PM

Ok I rad FAQ for my Router where was written

Quote

Enter the name of the program into the Application box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea. If you are forwarding a single port, enter that port number into the Start and the End boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Start box. Then enter the highest number of that range into the End box. Use the Protocol drop down box to select the protocol type of the ports you are forwarding. Enter the ip address to forward these ports to into the IP Address box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box. Put a checkmark in the Enable checkbox.

When you're finished, click Save Settings near the bottom of the screen to save your changes.

I did that and changed protocol at TCP type.
Exellent, everything work fine and everybody can look at my http BUT, Now I can't go to change settings in my Router :eek: Now, when I trying to go to router it showing me my http. Please, help me return my router. :roll:

rejetto · **Reply #4 on:** August 05, 2006, 05:51:44 PM

if you type the internal address of your router, you should still access it, from the LAN

Guest · **Reply #5 on:** August 06, 2006, 02:09:32 PM

How can I do it exactly? What is LAN, where is it?

rejetto · **Reply #6 on:** August 07, 2006, 09:05:49 AM

LAN = local area network

if you have an address like 10. or 192.168.
that is a LAN address
use an address like that for accessing your router
usually http://routeraddress/

Anonymous · **Reply #7 on:** August 08, 2006, 06:44:56 AM

"LAN = local area network" :lol: shure, I know that maybe I was little confuse because it was wery hard day. :roll:

THANK YOU WERY MUSH!! Finally I got acces to my rauter horeey

Next time you should tell that smb MUST use NOT IP address but it shout be Default Gateway because they are little different.
At first I tried go throw my IP addres but it didn't help then I find my Def. Gateway and throw it I've got my router. Thanks again. Now I'm really happy and I'm more happy that's from now on I would have my own ftp\http!!

P.S. Local IP 192.168.1.101
Default Gateway 192.168.1.1 :!: