rejetto forum

Software => HFS ~ HTTP File Server => Topic started by: aik on July 28, 2006, 07:15:36 AM

Title: how to force HFS to responds on multiply interfaces?
Post by: aik on July 28, 2006, 07:15:36 AM

I have a winxpsp2 machine with ethernet card (172.17.0.100), usb wifi (192.168.0.1), also I have VPN connection (external ip address). So I have 3 interfaces. But HFS (even 2.0) can respond only on one of them (configurable via checkbox in menu). How to deal with all of interfaces in the one time?
Thanks!

Title: how to force HFS to responds on multiply interfaces?
Post by: ledufe on July 28, 2006, 10:38:11 AM

hi aik, at my work, i use hfs 2.1beta 14 and i have too more than 3 network interfaces, one from hamachi, one from local area network another one wireless, and another bluetooth, and using the right ip of each interface i can access it in all of then, i just have to write http://IP-FROM-ANY-INTERFACE-OF-MY-SERVER:PORT-CHOOSED
and it works, it works on pocketpcs that access the hfs via wireless, it works on some gsm phones via bluetooth, it works on my lan (off course it works) and througt my wan or over internet.....
and about the checkbox that you are refering i guess that you don´t find this but ther is a option to accept connections on any adress

Title: how to force HFS to responds on multiply interfaces?
Post by: MarkV on July 28, 2006, 07:26:47 PM

You have to specify your IP addresses in IP address - Custom.... Then it should work.

MarkV

Title: how to force HFS to responds on multiply interfaces?
Post by: Anonymous on July 31, 2006, 07:53:48 AM

Quote from: "MarkV"

You have to specify your IP addresses in IP address - Custom.... Then it should work.

MarkV

how? My UI does not have such option. I use "HttpFileServer 2.0"

Title: how to force HFS to responds on multiply interfaces?
Post by: MarkV on August 01, 2006, 12:26:03 AM

Switch to expert mode first.

MarkV

Title: how to force HFS to responds on multiply interfaces?
Post by: Anonymous on August 01, 2006, 06:28:47 AM

Quote from: "MarkV"

Switch to expert mode first.
MarkV

you right :) I switched. But it seems this feature does not work. I entered 3 addresses, but this only duplicates items in "IP address" menu, and only one IP address is selected in it (if IP appears twice - both are selected).

Title: Re: how to force HFS to responds on multiply interfaces?
Post by: rejetto on August 05, 2006, 05:29:51 PM

Quote from: "aik"

But HFS (even 2.0) can respond only on one of them (configurable via checkbox in menu).

you are wrong, it is working on all networks.
the address you are selecting is only for copying the address