rejetto forum

what's the matter ? 2.1d auto changes the port 80 to 81

loritw · 9 · 2319

0 Members and 1 Guest are viewing this topic.

Offline loritw

  • Occasional poster
  • *
    • Posts: 1
    • View Profile

Offline Pit

  • Tireless poster
  • ****
    • Posts: 115
    • View Profile
    • EDV & Netzwerkservice in Berlin
please check, Is there another programm thats starts first and use Port 80?
You reach our Webserver every day between 9 AM to 10 PM under: http://phampel.dyndns.org or http://free4you.dyndns.org


Offline rejetto

  • Administrator
  • Tireless poster
  • *****
    • Posts: 13438
    • View Profile
auto changes?
please, explain better what you do before it does it.
is it just after the self test?


Offline ice81

  • Occasional poster
  • *
    • Posts: 22
    • View Profile
auto changes?
is it just after the self test?

^^ Yes it is !!! I Have connectet my Server over W-Lan !!! When the Signal is Low - Very Low and I make a Self Test HFS jumps automatic to Port 81 !!! Standard I use port 5000 for HFS !!! HFS do the Same when I use Port 80 for Standard !!! All Ports are forwarded means 80,81,5000 ... !!! The Self Test is well everytime positive but than on Port 81 !!! When the Signal is good then all is Normal and the Test is Positiv on Port 5000 !!!


Offline rejetto

  • Administrator
  • Tireless poster
  • *****
    • Posts: 13438
    • View Profile
when the self test fails using the port you chose, it tries other ports.
it means your ports 80 and 5000 are not forwarded by your router... it failed there.
while 81 is ok, so it leaves 81 in the port box.


Offline ice81

  • Occasional poster
  • *
    • Posts: 22
    • View Profile
when the self test fails using the port you chose, it tries other ports.
it means your ports 80 and 5000 are not forwarded by your router... it failed there.
while 81 is ok, so it leaves 81 in the port box.

Yes but it is only when the w-lan signal is low !!! All ports are forwared in Router and firewall even if the signal is low !!! So that is not a Problem for me because my signal is very high !!! I had noticed this when i was changing the Signal power in my router !!!

Sorry for my Bad English  :-\ !!! I´m from germany  8) !!!



Offline ice81

  • Occasional poster
  • *
    • Posts: 22
    • View Profile
weird

Think Not !!! I mean it´s only when the Signal is so Low that the Server Loses the contact to the Router for a second and you make a Self Test !!! Hfs jumps automaticly to Port 81 each time !!! Maybe this is the First Port that HFS tests by a Self test ??? ??

Sorry for my Bad English  :-\ !!! I´m from germany  8) !!!


Offline rejetto

  • Administrator
  • Tireless poster
  • *****
    • Posts: 13438
    • View Profile
this is the list, in order
'80','81','8000','8080','1','9000','1000','7000'