rejetto forum

can you run a server through

Guest · 14 · 3694

0 Members and 1 Guest are viewing this topic.

Anonymous

  • Guest
can you run a server though 2 routers? if so....how??


Offline rejetto

  • Administrator
  • Tireless poster
  • *****
    • Posts: 13523
    • View Profile
you just have to configure both routers
twice port forwarding



Anonymous

  • Guest
sorry to double post, but since my comptuer is not hooked up to the first router would i have to go to a computer that is connected to it to set up the port forwarding?


Offline rejetto

  • Administrator
  • Tireless poster
  • *****
    • Posts: 13523
    • View Profile
Quote from: "Anonymous"
so forward both the same way?

no
the first router has to forward to the second router
so the IP address in configuration is different

Quote
sorry to double post, but since my comptuer is not hooked up to the first router would i have to go to a computer that is connected to it to set up the port forwarding?

not necessarily. you just need access to the router through a network. direct connection is not required. but this may require right configuration.


Anonymous

  • Guest
ok, but how would i forward the first one to the second, i dont understand how to do that and i have tried to access it, using 192.168.1.1 but thats only one of them right? or are those settings for both?


Offline rejetto

  • Administrator
  • Tireless poster
  • *****
    • Posts: 13523
    • View Profile
to access the other router you have to know its address.
then access its configuration panel.


Anonymous

  • Guest
and to find that out i have to get on a computer hooked up to the first router? or no?


Offline rejetto

  • Administrator
  • Tireless poster
  • *****
    • Posts: 13523
    • View Profile
maybe using tracert command, or asking your network administrator



Offline rejetto

  • Administrator
  • Tireless poster
  • *****
    • Posts: 13523
    • View Profile

Anonymous

  • Guest
this is what i got


Tracing route to rejetto.com [207.210.215.198]
over a maximum of 30 hops:

  1     *        *        *     Request timed out.
  2    12 ms    10 ms    11 ms  10.118.220.1
  3    12 ms    11 ms    11 ms  24-116-39-9.cpe.cableone.net [24.116.39.9]
  4    25 ms    25 ms    26 ms  12.127.79.49
  5    76 ms    77 ms    76 ms  12.127.6.26
  6    87 ms    87 ms    87 ms  tbr2-cl10.sffca.ip.att.net [12.122.12.113]
  7    79 ms    81 ms    80 ms  tbr1-cl30.sffca.ip.att.net [12.122.9.137]
  8    82 ms    83 ms    82 ms  tbr1-cl3.la2ca.ip.att.net [12.122.10.26]
  9    83 ms    83 ms    82 ms  tbr1-cl20.dlstx.ip.att.net [12.122.10.49]
 10    79 ms    78 ms    79 ms  gar1-p340.dlrtx.ip.att.net [12.123.16.161]
 11     *        *        *     Request timed out.
 12    71 ms    71 ms    71 ms  border4.ge4-1-bbnet2.ext1.dal.pnap.net [216.52.1
91.94]
 13    72 ms    72 ms    73 ms  colo4dallas-3.border4.ext1.dal.pnap.net [216.52.
189.10]
 14    83 ms    73 ms    84 ms  206.123.64.34
 15    80 ms    83 ms    72 ms  hspheredns.com [207.210.208.3]
 16    73 ms    72 ms    71 ms  web.u2-web.com [207.210.215.198]

Trace complete.

and also the one that i could get to was the first one, the Second one which is a Workgroup switch i couldnt figure out how to get to for port forwarding and couldnt find anything about it


Anonymous

  • Guest
thanks Rejetto you helped me alot i got it set up.

Code: [Select]
http://pscreak.myftp.org/