rejetto forum

Software => HFS ~ HTTP File Server => router & port problems => Topic started by: JusyME on December 19, 2007, 01:07:20 PM

Title: How do i configure my router?
Post by: JusyME on December 19, 2007, 01:07:20 PM

- How do i configure my firewall / router?
D-Link Router (thanks to member moondog)

Before you start, note the address of your router. To find this, in HFS, select "IP address" and look at the unchecked entries. Your router address is usually in the form "192.168....".
Open Internet Explorer or Firefox and type in (for example):
http://192.168.0.1/
Use your password (if necessary), or type in "admin", to access the "Settings" page, and navigate to "Advanced".
Click "Enable" on the "Dlink" page.
Type in whatever you wish for "Name".
For "Private ip", type in your router address. (Do not include "http://". )
For "Protocol Type" check "tcp".
For the last two items, type in "port 80". (Or whichever port you have assigned to HFS.)
Click "Always" and then "Apply" to complete the process.


i can't find the "Enable" on the "Dlink" page.Someone help me thx.

Title: Re: How do i configure my router?
Post by: MarkV on December 20, 2007, 04:32:50 PM

You should take a look at the Virtual Server page.

Title: Re: How do i configure my router?
Post by: JusyME on December 21, 2007, 03:23:04 AM

ok...thx for your reply..
i can use it now :)