&RQ <-> ICQ2Go problem

Off.Just.Off · **on:** January 15, 2003, 04:30:46 PM

Since at least January 6, ICQ2Go don't receive messages from &RQ after 1st message sent from ICQ2Go to &RQ.
Send Added-You & Contact List work ok. Last normal conversation was at December 24. Please, fix it ASAP!

&RQ 0.9.3.9 & 0.9.4.4 tested.

Anonymous · **Reply #1 on:** January 16, 2003, 02:47:48 PM

I don't think the problem is caused by &RQ, i tried also sending messages to ICQ 2 go from Trillian, but it is not working, maybe the problem is with ICQ2Go.

Off.Just.Off · **Reply #2 on:** January 16, 2003, 03:00:48 PM

Quote from: "Anonymous"

I don't think the problem is caused by &RQ, i tried also sending messages to ICQ 2 go from Trillian, but it is not working, maybe the problem is with ICQ2Go.

ICQ9x & ICQ200x & miranda & sim works without any problems !!!
So, if it can be fixed it should [must] be !!

rejetto · **Reply #3 on:** January 16, 2003, 03:03:35 PM

icq2go often changes and (of course) does not care about compatible clients

i hope to fix it soon

Off.Just.Off · **Reply #4 on:** January 16, 2003, 03:17:46 PM

Quote from: "rejetto"

icq2go often changes and (of course) does not care about compatible clients

i hope to fix it soon

Thanks,
hope You 'll be so kind to do it, as we have no GNU sources released yet.

joxy · **Reply #5 on:** January 24, 2003, 10:42:47 AM

i confirm presence of this bug.

1. &rq cannot send plaintext msgs to icq2go. icq2go does never receive them.
2. icq2go is able to send plaintext msgs to &rq.
3. icq2go reports icq2go clientid as "v7 icq2000" instead of "icq2go"

additional things, not related to icq2go:

4. &rq reports trillian clientid as "v8 icq2001/2" instead of "trillian"

joxy · **Reply #6 on:** January 24, 2003, 10:45:53 AM

For instance, opensource sim-icq client (http://sim-icq.sf.net/) reports icq2go & trillian clientids correctly, and is able to send plaintext msgs to icq2go, so you might want to refer to sim-icq source code.

krausen · **Reply #7 on:** January 27, 2003, 08:19:18 PM

Help to me! Please!
Half of our corporation works on RQ and other half of corporation works in GOICQ.
We want to work well.
Help to find the solution.
Thanks

rejetto · **Reply #8 on:** January 27, 2003, 11:58:28 PM

i ALREADY fixed the problem

as soon as i finish this 0944 it will work with icq2go

krausen · **Reply #9 on:** January 28, 2003, 10:37:48 AM

I will test
thanks

joxy · **Reply #10 on:** January 28, 2003, 11:46:15 AM

test results: "0944unofficial" still triggers this bug.

will be waiting for "0944official".

though, my most important parties switched from icq2go to &rq, so myself, i will not actually be waiting :/ :)

(i didnt ask'em, they did that on their own)

Melkor · **Reply #11 on:** February 01, 2003, 05:16:51 AM

this bug is terribly annoying to me! if you said that you have found a solution, i beg you to release a fixed version of this great icq clone as soon as possible!
Greetz,
Melkor

rejetto · **Reply #12 on:** February 01, 2003, 07:55:54 AM

published

finally i moved to gamesnet.it

now i'm waiting for rejetto.com to point to the new hoster

joxy · **Reply #13 on:** February 01, 2003, 09:55:04 PM

i posted the test report for 0944official, see the forum thread for autoNA bug. There are some errata :)

Melkor · **Reply #14 on:** February 03, 2003, 04:37:13 PM

Thanks for fixing! Works properly now, but some other clients like ICQLite are now also reported to be ICQ2Go... just a cosmetic thing.

&RQ <-> ICQ2Go problem

Anonymous

krausen

krausen