Author Topic: After changing the external address, the server is unavailable. I ask for help!  (Read 1657 times)

0 Members and 1 Guest are viewing this topic.

Offline vladimirov70

  • Occasional poster
  • *
  • Posts: 4
    • View Profile
After changing the external address and DNS, the server is unavailable.
laptop HP 635
AMD E 450 APU 1.65 Ghz
RAM 2Gb
HDD 350Gb
Windows 7
32 bit
WI-FI
WPA-Personal
AES
Wireless network adapter - Qualcomm Atheros AR9285 802.11b/g/n WiFi Adapter (Drivers are updated, but still deleted and installed again)
Router Tenda W316R
I use NO-IP
simple_port_forwarding.exe  - not helped
More in the pictures :'(
What can be done?
Thanks to everyone who can help!












Offline vladimirov70

  • Occasional poster
  • *
  • Posts: 4
    • View Profile
Now it helps only to disconnect the router and laptop from power. And a new boot with the entry of the login and password of the network. But this has to be done too often! And if I'm not at home the server is unavailable  >:(

Offline bmartino1

  • Insane poster
  • *****
  • Posts: 750
  • I'm only trying to help i mean no offense.
    • View Profile
    • none - google translate
okay, from the looks of things (your router is at fault).

first wifi will generate more unnecessary traffic, the pc hosting should be lan wired connected. (this is not your issues, nor is drivers)
Second rejeto is unable to 100% fix the builtin test option on hfs. that message box is a lie. (clearly as you have had connections) and i have that fail on my properly configured routing

third (potential solution)
verify that your network adapter is static-ly set to the ip address for your port forwards: you have 192.168.1.100 (according to your router via picture)
view this post here for some more info: http://www.rejetto.com/forum/router-port-problems/some-router-info-for-newbies-or-not-so-newbies/msg1059916/#msg1059916

my suggestion is to change the nat routing in the router (as your isp could be blocking port 80)
so to test hfs change port to 8080
in the router port forwards change 80 in both staring and ending to 8080

test you connection either from a proxy site or pc not apart of your network. http://you no ip dns.com:8080

if it works great

to bring it back to port 80 change the start port in the port forwarding of the router
(the first port box) to 80

-------------------
it is my belief that either your pc ip is not static and is not staying to the ip required to port forwarding, or your router is at its EOL (end of life) as there are not meant to last 3-5 years...

als, you seem to have set hfs to a dns name ( if you hav routing setup correctly, and no the advance features of that side, then i would recommend it.
*I would ask you to either rest hfs or change the ip it connects to to the ip address not the dns name (as that is configured elsewhere and is not apart from hfs at this time.)



« Last Edit: April 12, 2017, 12:02:09 PM by bmartino1 »
I'm only trying to help i mean no offense.
thank you for your time and patience,
Bmartino1

Follow members gave a thank to your post:


Offline vladimirov70

  • Occasional poster
  • *
  • Posts: 4
    • View Profile
Thank you, friend! Helpful information.I will carry out your recommendations. I did a test for open ports. ALL ports are closed. Open ONLY 80.These are the conditions of the provider. I'll try to connect the router through a cable, not a wireless network. Perhaps this will reduce the problem.

My English is not very good, I'm afraid I did not understand the last question. I will answer as I understood. My IP is DYNAMIC. I use the No-IP service , https://www.noip.com. Every 5 minutes it checks my dynamic IP and if it changes, it redirects it to http: //100kino515.ddns.net. It is rather an imitation of a static IPI. As far as I understand it.
Most likely the problem is in the old router. Thanks for the help!

« Last Edit: April 12, 2017, 01:26:22 PM by vladimirov70 »

Offline LeoNeeson

  • Insane poster
  • *****
  • Posts: 433
  • Solitario...
    • View Profile
    • twitter.com/LeoNeeson
Code: [Select]
http://100kino515.ddns.net/
Ваш вебсайт это работает корректно. Я могу подключиться к сервер обычно. / Your website is working correctly now. I can access your server normally.
• HFS ahora también disponible en Español! (Clic aqui) :)
• HFS is now also available in Spanish! (Click here)

Follow members gave a thank to your post:


Offline vladimirov70

  • Occasional poster
  • *
  • Posts: 4
    • View Profile
Thanks for test!

Follow members gave a thank to your post: