rejetto forum
Software => HFS ~ HTTP File Server => Topic started by: rejetto on December 16, 2003, 04:13:20 AM
-
i am testing 1.6, and you?
www.rejetto.com/temp/hfs.zip
temporary what's new
ver: 1.6
+ LOGIN button (browsing)
+ support for external links in the VFS: File Menu -> "New link"
+ customizable 401 and 403 HTTP error pages
+ customizable ban page
+ faster page generation
+ Menu -> Other options -> "Use comment as realm"
+ Menu -> Other options -> "Login realm"
+ Menu -> Limits -> "Connection inactivity timeout"
+ Menu -> Encoding URL -> "Use UNICODE in HTML"
+ Menu -> Help -> "Introduction"
+ Menu -> Virtual File System -> "Reset hits"
+ Menu -> Virtual File System -> "Reset downloads"
+ Menu -> "Abort file addition"
+ File Menu -> Icon
+ File Menu -> Switch to virtual
+ File Menu -> "Customized realm"
+ File Menu -> Access for users -> ALL/NONE
+ Log Menu -> "Log what"
+ Log Menu -> "Log on video"
+ Connections menu -> "Kick idle connections"
+ Users -> User properties: browse protected resources by user
+ complete downloads counting
+ "Time left"
+ more XP styled
+ added Reset button in "Set user/pass" dialog
+ support for default favicon.ico (i saw Mozilla using it)
+ new HTML template symbols: %total-bytes%, %total-kbytes%, %total-size% (size of listed files)
* connections box: merge of "IP" and "User" fields
* connections box: "Agent" and "Start time" displayed in tip
* folders known before as "autoupdated folders" are now "real folders", others (yellow) are "virtual folders"
* new "let browse" behavior
* options saved to file by default
* "reload open VFS" by default
- problems sending HTTP error pages
- problems with files with corrupted timestamp
- VFS: minor redrawing problem
- "Hide tree" was not propagating to autoupdated folders
- hits were not displayed (in tips) for folders
- it is safer now during long files addition: files are locked and you can quit the program at once
- removed a useless limit on filenames
- drag&drop was restricted to labels area
- inverted ban logic was not applyed on start (but after opening options window)
- the hidden graph was reappearing after a couple of restarts
- fixed possible DoS attack
- 4GB single file limit removed
- whole drives were unsupported
- other minor bugs
-
ok.thank
-
It's missing sections of the html template
-
The links I create are not apearing in the browser.
-
When I right click in 'Access to protectect resources' in user properties and the list it's empty there is an error: "Access violation at address 004CCEA1 in module 'hfs.exe'. Read off address 0000000C."
-
It's missing sections of the html template
the template has changed
if you have your own customized, you have to update it or just use the default one
-
When I right click in 'Access to protectect resources' in user properties and the list it's empty there is an error: "Access violation at address 004CCEA1 in module 'hfs.exe'. Read off address 0000000C."
fixed
-
The links I create are not apearing in the browser.
it does to me
please report how to reproduce the bug
-
+ LOGIN button (browsing)
Does this mean a login button on the main page?
-
I have found the problem. :idea:
I used this version of hfs.exe in an empty folder. When I start it, the default html template that is used is not the same as the default html template that apears when I press the default button.
That is why i could not see the links, the login button, and the other things.
-
+ LOGIN button (browsing)
Does this mean a login button on the main page?
yes
-
I have found the problem. :idea:
I used this version of hfs.exe in an empty folder. When I start it, the default html template that is used is not the same as the default html template that apears when I press the default button.
That is why i could not see the links, the login button, and the other things.
the template is also saved in the registry (if you don't specify to save options on file)
you had the template saved in the registry, that's it
i guess i should put a warning on the template window, about not be using the default one
-
Got it
I agree with your sugestion.
I could be something in the html window name.
Ex:
HTML template - default
HTML template - c:\hfs\hfs.tpl
HTML template - HKEY_................
-
You can set 'Access for Users' on a new link. Should that be possible?
-
You can set 'Access for Users' on a new link. Should that be possible?
I tried it once more, but it works fine. No problem.
One other thing:
After loggin in, can there be a logout button? The sessoin will remain open if you have a browser open. I think there should be a logout button as well. ;)
Regards,
The Etron
-
At last.... :) I like the new URL feature (which I suggested long time ago... ;) ).
Now HFS to a REAL VIRTUAL-GLOBAL File System :^^:
One problem and two suggestions:
A* in the URL tooltip - you cannot see the comment ...
B* suggestions:
1. Support "hits" count on URL links (same as in files) in HFS side and on the other end
2. Add hits count to folders - that will be the sum of all it's tree-hits (only if it will not take time to calculate and slow everything down...)
3. and - this is a tricky one: support two typesqicons of URLs - one is for address-only type (i.e. - xxx.yyy.zzz or .../<page link>) and the other files-type (<address>/<file_name>).
The file-type will have also the "run" option available on the menu ' and can have a different icon - like the globe+the file type icon in it.
OK, there are 3 and not 2 suggestions, so you can stop the implementation after #2 ... ;)
Again, nice work!
-
You can set 'Access for Users' on a new link. Should that be possible?
yes, i find it is very useful with the "List protected items..." option
After loggin in, can there be a logout button? The sessoin will remain open if you have a browser open. I think there should be a logout button as well. ;)
i wish i could but...
15.6 Authentication Credentials and Idle Clients
Existing HTTP clients and user agents typically retain authentication information indefinitely. HTTP/1.1. does not provide a method for a server to direct clients to discard these cached credentials. This is a significant defect that requires further extensions to HTTP. Circumstances under which credential caching can interfere with the application's security model include but are not limited to:
- Clients which have been idle for an extended period following which the server might wish to cause the client to reprompt the user for credentials.
- Applications which include a session termination indication (such as a `logout' or `commit' button on a page) after which the server side of the application `knows' that there is no further reason for the client to retain the credentials.
This is currently under separate study. There are a number of work-arounds to parts of this problem, and we encourage the use of password protection in screen savers, idle time-outs, and other methods which mitigate the security problems inherent in this problem. In particular, user agents which cache credentials are encouraged to provide a readily accessible mechanism for discarding cached credentials under user control.
-
in the URL tooltip - you cannot see the comment ...
fixed
1. Support "hits" count on URL links (same as in files) in HFS side and on the other end
hmm, this is impossibile unless i use a redirection system. that is, who click on a link will make a request to HFS that will then redirect it to the real address. this 1. slowdownss user browsing 2. hides the real address ...do you want it?
2. Add hits count to folders - that will be the sum of all it's tree-hits (only if it will not take time to calculate and slow everything down...)
i did it, but is is the count of hits to the folder, not the recursive sum.
3. and - this is a tricky one: support two typesqicons of URLs - one is for address-only type (i.e. - xxx.yyy.zzz or .../<page link>) and the other files-type (<address>/<file_name>).
The file-type will have also the "run" option available on the menu ' and can have a different icon - like the globe+the file type icon in it.
i understand the need for 2 icons, but to run a link just use the browse command
so, is your need to change the icon?
-
download the last 1.6 and you will change icons ;)
just update the what's new list, also
-
download the last 1.6 and you will change icons ;)
just update the what's new list, also
Got it.
Some notes:
1. If you can mark/show 1.6xxx versions as RCx it can help
2. hits on folders: I was amazed to see that actually - they ARE counting the clicks on files inside them ... :D did you mean to do that ? It IS good!
They also ADD to the hit count clicks on the folders themselves... well, not too bad ;)
3. New ICONs implementation - look nice (allthough I meant it differently) :
a. icons list - has many many duplicated icons. (on my VFS files)
b. new assigned icons are NOT passed to the other side
c. general thing: passing of the icons is very slow. may be you can consider puting an option to disable passing of icons. better yet - give a control to the remote client to do it.
What I meant was:
that somehow you can "treat" URL links as regular files (detect the file type at the end of the URL string) and automatically use this file extention icon but show near it a special icon/symbol showing that it is actually remotely located link.
Just got an idea on another (better?) way to do it - do not change the icon at all, just underline the file/link name + bold font or blue color . Same thing - at the remote end.
4. GETRIGHT:
a. check again hfs with it. Looks like the "new" link-files might be "confusing" it... also - try protect the root point and see it's effect
b. files inside folders - it seems not to show them as files but as sub-folders...
5. edit: deleted ...
Nice work!
-
2. it does not work that way, i just tested it.
however i introduce now a new symbol %item-dl-rcount%' that will do what you are asking.
it will count only hits for files.
3a. it may be caused by the fact that Windows actually stores different icons with same look. now i added a byte-byte comparison. i hope this check won't slow down thing. however it is done only on file addition.
3b. fixed
3c. the option is already there: use system icons
3d. i am using the shGetFileInfo() winapi call to retrieve file icon. it seems to work only with existing local files, so i can't retrieve remote file icon.
4a. i don't have getright installed ATM, could you be more specific so that i can fix the bug without installing it?
4b. getright does not know what is a file or folder, it just has links <a>. it will show a file icon if the link has a final extension, a folder icon if it has none.
...just uploaded rc1
-
If I disable the option of show system icons all default icons are like ms-dos icon; but If I enable the show system icons option all my files with default icon show a hand (the last icon of the list) instead of the system icon.
-
Regarding 1.6.rc1:
Hi, when I add a hudge folder and answer no on the 'auto update' question and during adding items deleting the folder again, I get an error.
Thanks for creating this program, it's so easy to work with! :D
-
Hi, when I add a hudge folder and answer no on the 'auto update' question and during adding items deleting the folder again, I get an error.
this bug is already in to-do list
-
If I disable the option of show system icons all default icons are like ms-dos icon; but If I enable the show system icons option all my files with default icon show a hand (the last icon of the list) instead of the system icon.
whoops 8O
i uploaded the wrong one
please, redownload
-
If I disable the option of show system icons all default icons are like ms-dos icon; but If I enable the show system icons option all my files with default icon show a hand (the last icon of the list) instead of the system icon.
whoops 8O
i uploaded the wrong one
please, redownload
can you post it's link again ? I'm getting the same file... (maybe mark it rc1a ;) )
-
I just downloaded the latest HFS that says RC1 but it isn't working. I am able to get the first page up but then cannot login or browse any unprotected folders. IE just sits and tries to open the page but never does.
I opened a previous RC1 that I downloaded and it works fine. I think something is wrong twith the last RC1 that was posted.
-
With this downloaed version when I try to share two files, ex: a gif and a excel file HFS gives an error about not having system resources. Then I can't make nothing else with the computer besides restarting it.
-
yes i see
i introduced some error in the last editing
i can't fix it now because i'm moving for holidays
i hope to fix it in 48 hours
-
ok
:D Merry Christmas :D
-
Hi!
Merry XMAS to u all!
And merry xmas to the bes http server ever: HFS!!!
TGeRi
-
rc2 is up and temporary what's new list has been updated
-
rc2 is up and temporary what's new list has been updated
A small bug (in rc2):
Press F5 to refresh the view in the browser - and you'll see the DL count & hits count in the tray icon (& tool tip) increasing with # of files ? folders ? links ?
Edit (23-Dec)
A big bug :
a few popups "out of system resources" after about 15 min., with only a few F5 and most of the time - Idle. (Win 98).
After that - a blue screan!!! and thats it - only hard reset helped! :(
-
The Programs crash under windows 2000 ! Doenst start ..
CPU at 70% at Download !
mfg tomcat
MERRY CHRISTMAS !!
-
azz :(
test rc3 please
same URL
what's new
+ LOGIN button (browsing)
+ support for external links in the VFS: File Menu -> "New link"
+ customizable 401 and 403 HTTP error pages
+ customizable realm
+ Users -> User properties: browse protected resources by user
+ File Menu -> Icon
+ complete downloads counting
+ Time left
+ Menu -> Other options -> "Use comment as realm"
* Connections box: merge of "IP" and "User" fields
* Connections box: "Agent" and "Start time" displayed in tip
* folders known before as "autoupdated folders" are now "real folders", others (yellow) are "virtual folders"
- problems sending HTTP error pages
- VFS: minor redrawing problem
- "Hide tree" was not propagating to autoupdated folders
- hits were not displayed (in tips) for folders
- comment was not displayed (in tips) for links
-
So, what WAS actually modified/fixed ?
Edit (21:30) :
@ rejetto -
Purple colored folder icons in rc3 ?????????????? is this a special version for Christmas ? What happened to the yellow ones? :D
I mean in the HFS SW/tree , not the client.
edit :(22:00)
few things:
- log side is being refreshed very havily - loading the HFS (actually - it should not refresh at all - since it is printing out-of view (BTW - I would do it in reverse order - last at the top)
- The file view - in the client is all massed up! subfolders are being duplicated twice , files are being "duplicated " to folders above them etc.
May be - wait after the holidays, rest a bit, and test is some more ... :?
Edit PS (23:00):
After about 40 min - still "out of system resources" popup dialog is showing up :(
-
despite the amount of wine of last days, i'm not entirely drunk
someone said that actually it works well only on winxp
this complicates things a lot for me, since i use winxp
i may need to restart 1.6 from 1.5 sources, readding things piece by piece until we found what's the problem
-
Look at these two screen shots, from both 1.6rc3 & rc1 . It might help.
(http://home.barak-online.net/rafi-d/hfs%201_6-1_6rc3.jpg)
(http://home.barak-online.net/rafi-d/hfs%201_6-1_6rc3_clients.jpg)
:?
Edit (1) :
I also get "list index out of bound" when downloading. But as I remember this used to be also in previous versions.
I'll also try reproduce the "out of resources " and let you know. I have a hunch this has to do with running Kazaa 2.6 at the same time .
Edit (2): (Win98)
I checked with "taskinfo" and noticed that evrey time you do something in IE client (like F5) "the free GDI resources" - drops , and eventually reachs a near-zero value and freeze the system. When you use Kazaa - it simply starts at a lower value and get to zero faster... My guess is - it has to do with the log or the icons.
Win 98 is known for it's lousy mem management... so maybe you are not freeing somthing...
-
In the Set User/Pass you should make a reset button to it or something to remove the password already set
-
10q rafi, your report is good enough for me to investigate on this problem
...reset user/pass button added...
-
10q rafi, your report is good enough for me to investigate on this problem
...reset user/pass button added...
U r welcome. Keep on the good work! and have a marry Christmas :)
(PS - copy the screenshots if you need them. I might have to remove them from my website.)
-
well, the leak has been introduced with the new GIF library.
it was not made by me, so it is not trivial to fix.
anyhow, i introduced a cache system that reducing the leak may actually remove the problem.
i just uploaded rc4, please give it a test.
i was not able to understand anything about those purple icons. i just get yellow ones. let me know if this problem persists.
...the last releases are not exactly rc, i was wrong at first labeling, and the error propagated through.
we should be now near the stable version.
-
well, the leak has been introduced with the new GIF library
....
i was not able to understand anything about those purple icons. i just get yellow ones. let me know if this problem persists.
we should be now near the stable version.
rc4:
At first glance - the leak problem looks much better (= not effecting the resources).
About the purple - it is just ODD, not very important (it was not in your first 1.6 release...)
But - the screenshots were to show two more problems, so look closer:
1. The file/links structure is NOT correct in some cases - look under "protected" sub-folder and see the difference : two other "files" are shown, and are realy from the sub-folder below it ("faq.html" & index.html")
2. one other strange (but funny...) thing - in the "rc0" & rc4 look at the icon of the link of "hfs.exe"! somehow - you (?) "managed" to show the zip type file-icon for it ... ;) ...
-
1. are you sure you did not create real (autoupdated) folders? warning: adding a folder the question has changed, and the yes/no answer is swapped. Old .VFS files may be incompatible, thus if you have a problem, try recreating your VFS before.
2. i was not able to reproduce. are you sure you did not set a customized icon for it? try clicking on default icon and see if it changes.
in the while i fixed (to be released) this bug
- problems with files with corrupted timestamp
-
1. are you sure you did not create real (autoupdated) folders? warning: adding a folder the question has changed, and the yes/no answer is swapped. Old .VFS files may be incompatible, thus if you have a problem, try recreating your VFS before.
2. i was not able to reproduce. are you sure you did not set a customized icon for it? try clicking on default icon and see if it changes.
in the while i fixed (to be released) this bug
- problems with files with corrupted timestamp
2. - yes, it was my mistake. The icon was customized... :#)
1. - The first folder I have - IS a real forder. how do I check if a folder is autoupdated ? can this "confuse" HFS ?
It IS an older VFS. I was not aware that it may be incompatible. may be I'll try later to rebuild it...
-
as you can read in the whatsnew
* folders known before as "autoupdated folders" are now "real folders", others (yellow) are "virtual folders"
real folder = autoupdated folder
i think it was not a good name so i changed it
-
good idea!
TGeRi
-
Hi All,
Do you plan for adding the ability to start HFS as a NT Service (NT, 2k, 2k3, XP) or have anyone of you accomplish this some other way?
Cheers,
Joao
-
Do you plan for adding the ability to start HFS as a NT Service (NT, 2k, 2k3, XP) or have anyone of you accomplish this some other way?
I'm not a Delphi programmer myself but I've done some research and it looks like you have to start a new "service project", I think this would take a lot of work because you would need to rewrite some parts of code etc. (cf. http://oldlook.experts-exchange.com/Programming/Programming_Languages/Delphi/Q_20781244.html#9639834)
If you want so, I can make an installer for you with InnoSetup (free) wich will make sure that will make the application start every time you (or any user) logs in. This is not the same as a system service of course but it's a method of approach;) Just let me know.
-
Can be done in the RUN section of HKLM or HKCU. ;)
-
Can be done in the RUN section of HKLM or HKCU. ;)
That was what I was intented to do via a setup :P
-
I'm getting this one error in HFS 1.6 rc4 in WINDOWS XP SP1
1. When I try to set a password on anyting it gives the following error:
"Cannot focus a disabled or invisible window"
(http://home.comcast.net/~borosp/images/1.jpg)
I do not get this msg in in HFS 1.5g
-
error fixed in rc5
about the service.
i was waiting for this question. :P
you could start trying HFS under Firedaemon. I don't know if it works, but it would be a test.
I think that to get a "good" quality software as service, it has to be splitted up: GUI/Engine.
This would require a large amount of work, and i'm not interested in this feature.
That's why I don't plan to work on it.
-
well, browsing through the source i found a fullEncode variable that forces encoding, no matter for options.
this variable was used on page generator.
i just don't remember why i introduced it. :(
i will try to disable it and see what happens. (in next 1.6 test release)
have you tested it out yet?
-
where can I download that 1.06rc5??
Ruben
-
have you tested it out yet?
very little, but can't do much more
rc5 has just been uploaded
-
have you tested it out yet?
very little, but can't do much more
rc5 has just been uploaded
where??? On the first page of this thread??
Ruben
-
have you tested it out yet?
very little, but can't do much more
rc5 has just been uploaded
where??? On the first page of this thread??
Ruben
Yes, the link is the first page of this thread... Heres the link from there:
http://www.uniroma1.com/rejetto/temp/hfs.exe
-
have you tested it out yet?
very little, but can't do much more
rc5 has just been uploaded
For some reason, I still get rc4 from there. Can you double-check please ?
-
Yes, the link is the first page of this thread... Heres the link from there:
http://www.uniroma1.com/rejetto/temp/hfs.exe
Thanks
Ruben
-
i checked it rafi
it is the right version
you should be more mindful ;)
-
i checked it rafi
it is the right version
you should be more mindful ;)
It is not the first time I have such problems... :cry: it has to do with some cached temporary/internet files... :( probably because you use the same file name for all versions
have to do my yearly cleanup ... ;)
-
rc6 has been uploaded: http://www.uniroma1.com/rejetto/temp/hfs.exe
check the first post for what's new
-
I so far got 3 problems while I am running HFS 1.6 RC6 on WINXP SP1.
1. The program crashed twice while multiple users were downloading multiple files at the same time.
2 and 3 are in the screen shot below. They did not crash the program but came up with the warning prompt and occured again when multiple users were downloading multiple files at the same time.
(http://home.comcast.net/~borosp/images/hfs.jpg)
(http://home.comcast.net/~borosp/images/hfs1.jpg)
-
i fixed several similar bugs in RC8.
please redownload, and let me know.
-
I still have a question regarding "NEW LINK"! When I create a NEW website address link (ex: http://www.google.com) and save it in the tree, is this link supposed to show up in server main page? Because if it doesnt then whats the purpose of adding a web link that doesnt show up on your page? look at the screen shot below to see what I mean!
(http://sighost.fxp-matrix.org/albums/sigs/hfs.jpg)
-
I still have a question regarding "NEW LINK"! When I create a NEW website address link (ex: http://www.google.com) and save it in the tree, is this link supposed to show up in server main page? Because if it doesnt then whats the purpose of adding a web link that doesnt show up on your page? look at the screen shot below to see what I mean!
It is OK here (Win98) . Strange, but I cannot see the HFS version either on your screen 8O
Maybe try running HFS in a new clean directory ...
-
yes, that is meant to show on the main webpage
and it does work to me!
8O
i do not understand
you may try resetting your configuration
-
Something strange:
I tried to "rename" a link name and make it the same as the http:... address, and could not do it... 8O
It "refused" to rename the link, and just returned the previous text-name...
Rejetto ?
edit:
BTW - how about adding a checkbox inside the new-link-set-URL dialog that when checked - it will automatically-name the link - as the URL text ?
-
it is not permitted because it is not a valid filename.
but, well, it is not a file either. i will work on it.
-
rejetto, are you going to add a feature that would allow customizable realm for each file/folder? (without setting a comment?)
-
if you like it
-
What is the realm?
-
the string that appears in the user/pass dialog box
-
Of course I like it! :)
The realm of the files/folders could be stored in the VFS :)
Thanks!
-
the string that appears in the user/pass dialog box
I still do not understand what realm is. i don't see where this is at in the user/pass dialog box
-
sorry for being vague.
i was talking about the user/pass dialog of the browser, no the one of HFS.
-
I understood that. But I entered in a custom realm and it doesn't show up in the user/pass dialog window. I was able to get it to show up if the root is protected. Does the root have to be protected to get the realm to work?
-
@Rejetto -
remember you had a small bug you had to fix in the tooltip above the tray icon ? it had junk instead of <space><cr> between the displayed values (under Win98SE Hebrew enabled)
Same thing is in the tooltip above the "download" tray Icon. Can you do the same fix there ?
Thanks
-
rafi, does this problem apply also to tips in filebox, etc ?
-
rafi, does this problem apply also to tips in filebox, etc ?
If "filebox" means the tooltip above the VFS tree area - no. seems to be only when you put more the one text field in a raw (w/o <cr> ) ...
-
There's a problem in HFS 1.6 rc8 where HFS would ignore the resume request and sends from the beginning of the file.
Here's an example:
I set up a text file called "Testing.txt" in HFS (8 bytes) with the contents:
00001111
and with this bug:
*** GET REQUEST ***
GET /Testing.txt HTTP/1.1
Host: 127.0.0.1
Accept: */*
Range: bytes=4-
Pragma: no-cache
Cache-Control: no-cache
Connection: close
*******************
*** RESPONSE ***
HTTP/1.1 206 Partial Content
Content-type: text/plain
Content-range: bytes 4-7/8
Content-length: 4
Server: HFS 1.6 rc8
Content-Disposition: attachment; filename="Testing.txt"
0000
****************
As you see from the example above, HFS doesn't send the 1's but instead send from the beginning of the file, resulting a corrupted file on resume.
If the download isn't interrupted in between, the download would work just fine.
-
HTTP/1.1 403 Forbidden
Content-type: text/html
403 - You are not allowed to access this file
I am correct that the ban HTML couldn't be changed right? (1.6rc8)
Idea: I was thinking about a feature which will let people see why they are banned in the HTTP headers. For example:
HTTP/1.1 403 Banned (Leeching)
Content-type: text/html
You have been banned from the server because of the reason: (Leeching)
It would be nice if this feature is togglable and that the HTML in the ban is customizable as well as the HTML headers! ;) Also if this option were to be added into newer version of HFS, the variable %banreason% or etc should be added too. :P
Thanks!
-
resume problem fixed
there was also a problem in the "Connection: close" header. now fixed. (in rc9)
-
Thanks sooooooooo much, rejetto!
I am surprised how much time you put into your softwares... :)
Would you consider the customizable BAN message I mentioned above too?
Now checking every second for rc9 on the server. :D
-
had you a look at template in RC8 ?
it has already been implemented.
-
Was the realm issue I described resolved or is this the way is should be?
-
i just tested the problem you reported, and i was not able to reproduce it.
it works fine to me. the customized realm is shown. i tested with IE and Opera.
-
Customized realm works here too... :)
Where is rc9? :cry:
Waiting for resume to be fixed... ;)
-
HTTP/1.1 403 Forbidden
Content-type: text/html
403 - You are not allowed to access this file
I am correct that the ban HTML couldn't be changed right? (1.6rc8)
Idea: I was thinking about a feature which will let people see why they are banned in the HTTP headers. For example:
HTTP/1.1 403 Banned (Leeching)
Content-type: text/html
You have been banned from the server because of the reason: (Leeching)
It would be nice if this feature is togglable and that the HTML in the ban is customizable as well as the HTML headers! ;) Also if this option were to be added into newer version of HFS, the variable %banreason% or etc should be added too. :P
Thanks!
What do you think about this, rejetto?
-
I can only get the customized realm to work if I protect the root.
If the root is unprotected and I have a customized realm of "Test"
I get "password protected resource" as the realm when I select Login
-
rc9 has been uploaded
please be careful loading/saving VFS
functions has been modified but not tested
the whole build has not been tested that much to be honest, i need some rest
-
I can only get the customized realm to work if I protect the root.
weird, i'm sure i did not protect the root
please test with rc9
-
What do you think about this, rejetto?
i already replied
had you a look at template in RC8 ?
it has already been implemented.
if you want to have a faster experience exchange about developing/testing HFS, contact me on ICQ
-
i introduced realm for every file/folder
the "main" realm has been removed.
you can just set the realm for the root.
in facts, the realm is now hierarchic
i'm now going to update the what's new
-
I meant is there anyway I could show the "comment for this ban" so the user could see why they are banned from the server. ;)
Could you show me how to do that rejetto?
Thanks :)
-
I have tested the resume bug. And it's currently fixed in rc9.
I will test the other functions later in the day. :)
-
@Rejetto :
Just a general observation - if you can mark/write in the "what's new" for new RCs - what items are related to them. it will make reading it - easier...
like - in here:
http://filesharingtalk.com/index.php?showtopic=92194&st=0
-
Checking rc9:
1. bug with download tooltip - seems to be fixed
2. Minor problem - trying to relocate (move) a file on VFS tree by drag and drop - seems to fail in two cases:
a. you try to "put" it among other files-list
b. Edit: canceld. (See item below)
it is OK if you drag it over any other folder
3. another problem: even if you do not restrict the # of multiple connections from the same address it does not succeed to execute "multiple segmeted downloads" by get right.
Edit: On second thought - may be this is a good thing, restricting a user to a single download per file. Just check that it does not happend with -multi-users-resumed-downloads for a file ...
-
OK, rejetto. I tried restoring the Default Template for RC9. The ban section shows and it does show the ban reason when telneting, but the thing is that a lot of users has "Show Friendly HTTP Messages" on in Internet Explorer and most download manager doesn't show HTML contents automatically. So I am requesting that a feature to be added to next version of HFS, where the ban reason is shown in the HTTP headers as well. For example:
HTTP/1.1 403 Banned (Leeching)
Content-type: text/html
You have been banned from the server because of the reason: (Leeching)
One more thing that I have noticed in RC9, the "Users" feature works without a password. For example, when I made a user and put a password in HFS and protected some contents with user access. The Login button works but people could login without knowing the password at ALL! They just input the username & could login w/o a problem! :( Also the Login button's realm aren't customizable at this moment?
No problem with 2b, Rafi. Haven't checked the others yet.
Thanks rejetto for your hard work!
-
No problem with 2b, Rafi. Haven't checked the others yet.
OK, I got it wrong. The problem description is this:
2.b When you try to drag any file to any place - it shows the "disable sign" when you are not phisically locate the mouse on the text of the any folder name. I mean - when you put you the mouse on the right side of the folder name, and still the folder name is highlighted/selected - you cannot move the files into it.
On the root I had it was always like that because the "\" is very short ... :-)
-
I just downloaded RC9 and still i am unable to get the realms to work. I leave the root unprotected and then customize the realm on a protected folder. When select login, the realm isn't changed.
-
drag&drop fixed
login problem fixed (it was causing no security flaw, no access to protected items was granted)
http ban header added
login realm customizable
removed characters restriction renaming files/links
-
i re-tested realm customization on files and folders and it works for me with IE and Opera.
please, can someone else report his experience with that?
-
i re-tested realm customization on files and folders and it works for me with IE and Opera.
please, can someone else report his experience with that?
what exactly is your test procedure ?
Edit:
I do not know exactly how to use this "login" botton, so I tried - writing in the IE6 address - a full path of a protected folder - and the login dialog showed the comment I entered as the realm...
But it looks like you guys are trying something else...
How do you work with the "login" thing ?
-
Here's what HFS 1.6 rc10 returned when I tried the login procedures: (using customized realm) (So far it works! ;))
GET / HTTP/1.1
Host: 127.0.0.1
Accept: */*
Connection: close
HTTP/1.1 401 Unauthorized
Content-type: text/html
WWW-Authenticate: Basic realm="Customized Realm"
GET /~login HTTP/1.1
Host: 127.0.0.1
Accept: */*
Connection: close
HTTP/1.1 401 Unauthorized
Content-type: text/html
WWW-Authenticate: Basic realm="Customized Login Realm"
@Rafi, the login button is for "Users Login". When you setup a user account in HFS, you could protect items so that those items are shown/accessed only when those users are logged in.
-
this is my test procedure
brand new VFS
create new virtual folder
customize folder realm: "asd"
protect the folder with user/pass or account
browse the folder
"login" button is to authenticate the user withouth need to click on a protected resource.
purpose can be any, Anon just described one.
-
this is my test procedure
brand new VFS
create new virtual folder
customize folder realm: "asd"
protect the folder with user/pass or account
browse the folder
"login" button is to authenticate the user withouth need to click on a protected resource.
purpose can be any, Anon just described one.
I used almost the same procedure and it worked for me too.
I think that may be there is a misunderstanding among some users.
They might be expecting the realm to be displayed when the login-botton is pressed , and not when the protected folder is pressed ?!
So if they want to - you may add a customised realm for htis general dialog/ I think it is not needed...
-
wow.. 1.6 is looking like it will have some awesome features.
Right now, I found something that would be a very simple way of allowing me to make a mIRC script for HFS.
The script would modify a text file that the HFS uses to allow access by IP address.
The premise would be simple:
Someone wants to download a file from the HFS host, so they send a command... my script would do all the neccesary information handling within mIRC, and add their IP address to the access .txt that HFS checks upon connection. The mIRC script would then delete the IP address after a specified time amount (allowing them to start the download) then would remove the IP from the .txt file that HFS uses. The user would be downloading the file, and without their IP in the .txt file, they could not start another download. The mIRC script would handle how many times they could connect to the HFS per day, and even monitor traffic to a certain IP, and limit amounts of data to be used. Even add waiting lines for people to queue up.
I would love to see this feature built into HFS, as I am a mIRC scripter, and know many who could make use of this would be happy to see a mIRC script out there.
The only thing that I need incorporated into HFS is a way to enable a .txt file check that allows IPs in there to have access to a certain account type (which are already imbedded into HFS). If enabled, it would check the IP accessing and compare it to the .txt, and if the IP is in the .txt, it would grant them the extra priveleges.
I would do all the mIRC scripting and featured, and would be more than happy to give you the script, and provide technical support for it.
-
it is already in the to-do list, as you can see
i think a good solution would be to have an ip filter for accounts, then you would just tell HFS what IPs are good for the account X
-
They might be expecting the realm to be displayed when the login-botton is pressed , and not when the protected folder is pressed ?!
So if they want to - you may add a customised realm for htis general dialog/ I think it is not needed...
it is already there: "login realm"
-
They might be expecting the realm to be displayed when the login-botton is pressed , and not when the protected folder is pressed ?!
So if they want to - you may add a customised realm for htis general dialog/ I think it is not needed...
it is already there: "login realm"
Correct, my mistake :#)
-
drag&drop fixed
login problem fixed (it was causing no security flaw, no access to protected items was granted)
http ban header added
login realm customizable
removed characters restriction renaming files/links
@rejrtto -
in rc10 I tried trag&drop again and it seem to me that you need to change it like I mentioned last time(to be like in explorer):
* delete the new tooltip ("drag your files") that you show when the mouse is not on texts (it is not standard)
* whenever a file/link is highlighted in blue - you should be able to drop it (if not in the same place/folder/level) nomatter where the mouse is
now - when the mouse is above any white area (not over text) drops are disabled
-
Ok, I am having troubles to understanding what exactly realms etc allow you to accomplish other than a little bit more customised way of logging in?
Can somebody describe a cool feature this enables, and how to set it up?
Thanks =)
-
the "drag your files here" is not intenderd to be standard (?) but to help newcomers
the drag&drop fix is not in rc10
the "realm" is only to write something on the user dialog, nothing else
-
hello
-- wonderful software -- thank you very much The height of completeness moves.
I am a Japanese. There is no thing good so far in Japan.
however, a Japanese file name -- yet -- many bugs -- there is a character Don't I have you correspond by RC11?
-
is there anyway to limit IPs from downloading 2 files ata time... My concern is when people use download managers like DAP or getright and it takes up 30 connections to download multiple files.
What I mean is there using a download mgr which starts 30 seperate downloads at the same time.
Any way of limiting amount of connections a user can download at a time beofre starting the next download?
-
besides the use of a modifyable live user/pass or allow ip for mirc, with the incorporation of cgi bins would allow the creation of download systems like what you find on www.fileplanet.com , incorporation of waiting lines to prevent too much bandwidth splitting, daily bandwidth limits, download stats, and probably some more that I cant think about. The cgi and modifyable user/pass and ip allow would allow users to create alot of third party plugins to further extend possible features beyond what you create.
-
JO: i will have a look at unicode filenames. i hope i can support them.
polster: limits -> max connections for single address
-
I'm running rc10
The invert-ban-logic flag doesn't seem to work consistently
If I put an IP in the ban list,
and invert the ban logic to permit that IP
then save the configuration,
when i start the program again
sometimes I find my IP is banned
if I click the browse button
what seems to be happening
is that when the program first starts
the invert-ban-logic flag is not always set properly
(the ini file is ok ... invert-ban-logic=yes)
it will usually work properly
if I open then close the ban config window
I can put my IP in the (un)banned list
what usually happens then is
when i first start the program, my IP is banned
if I open/close the ban config window, my IP is unbanned
(for my router address and my dynamic internet address)
-
ban inverted logic fixed in rc11
-
JO: i was able to do this:
+ unicode encoding for URLs
but there could be further problems, caused by the files loading and by the VFS graphic element. in case you should report me detailed information about these problems if you want to see them fixed.
i would also appreciate a comment if all goes right, because it is impossible to test it for me.
-
rc11 has been uploaded
what's new updated in first post of this topic
-
i think we can stop 1.6 developing here
unless we find other bugs
if no bugs are reported in 5-7 days, i will publish it as stable
-
i think we can stop 1.6 developing here
unless we find other bugs
if no bugs are reported in 5-7 days, i will publish it as stable
What next ? V2 ? Or plenty of rest from us ... ;)
-
Ok, I tested rc11, and havent found any stability problems so far. Netscape 7.1 now understands mime types properly, a single file can be uploaded to multiple users at once, and the new logs are awesome. The only problem I noticed was that in the live logs, there was no newline identifier sent when logging. Everything runs together. But with the new live logs, scripting for mIRC, and in the future, CGI will be very easy.
-
Still the major thing that is keeping this software from hitting my #1 util spot is that there is no way to externally make downloads unique to a particular person/IP. When you serv over 90 GiB of files like I do, you often come across problems over users overbounding their user accounts, and downloading more than you want them to. It is impossible at the moment to automate temporary user accounts, and manage wether they have access to a single externally predefined file, or all of the files. Going through the files one by one, and creating a unique username/pass is more than tedious, and it is impossible to automate the process externally, because I cant; figure out the crc, or whatever check is enstated in the .vfs, so I cant automatically edit the .vfs enabling a specific file, then run hfs, so the user can download that single file. I cant make use of the inverse ban list because once they have access, they can download any number of files they want. I cant externally create/delete user accounts, which really wouldn't matter too much because they would still have access to any file they want before they started downloading it. I can use the logs to determine wether they are downloading a file, and then change the password for the account if there was a way to alter passwords, or accounts, but I still wouldn't be completely satisfied because they could download any file they wanted.
I would like to see either a built in queue system, which is fully customizable on how many people can be queued for download, how many files can a single person queue, how many files can be downloaded in a specified amount of time (mins/hours/days/weeks), how much b/kb/mb a person can use in a specified amount of time(mins/hours/days/weeks). OR the flexibility to create external programs which can manipulate settings from the use of the logs. These kinds of abilities would allow users to take an unpresidented level of control over a public style file server. If the path of flexibility allowing external applications to control these things, most likely a bunch of third party mods would end up appearing.
With that expansion, this utility would no doubt take my #1 favorite spot on my list. I guess I didn't really make that too obvious in my last posts concerning these specific issues.
-
Finally got my nick registered, but if you have any questions about my horridly organized post, lemme know.
-
i think it is not good to include a very complex system in HFS.
interaction with external software (DLL?) will increase in future versions.
-
Need to update the links to the forum/webpages etc in the next release.
-
link to 1.6 beta doesnt work
http://www.uniroma1.com/rejetto/temp/hfs.exe
-
It is indeed down
I really wanted to test it out.
If anyone has 1.6, please email it to me.
parker182@sbcglobal.net
Thanks a bunch in advance
-
uniroma1.com is down because me and my friends are moving to another host.
however, i think i will move the files on rejetto.com
(i hope there won't be bandwidth overuse problems)
-
let's start trying http://www.rejetto.com/temp/hfs.exe
-
if that doesn't work, I am hosting hfs1.6rc11 at http://129.118.196.81:27900/
-
If I use as command line a vsf file this vsf is automaticaly load, but in this case the log file is not created.
Another thing: sometimes the log file is all in one line.
-
what happened in the new releases?
it used to support some words in Unicode/ASCII Multi-byte Language
even the URLencode don't work now???
-
the URL force encode it into some weird hex??
http://127.0.0.1/¤¤¤å¦r¤å¥ó¦WºÙ.jpg
http://127.0.0.1/rW.jpg
-
it works great to me
what's the problem?
however, the change is that the encoding in the HTML is now Unicode instead of ANSI. that is, if you use chinese symbols, those should be correctly shown to european users too, because Unicode does not depend of codepages.
the URL copied in clipboard is still ANSI.
-
well it should be like this below without URL Encode
http://127.0.0.1/¤¤¤å¦r¤å¥ó¦WºÙ.jpg
after URL encode it should be like this below
http://127.0.0.1/%A4%A4%A4%E5%A6r%A4%E5%A5%F3%A6W%BA%D9.jpg
but it actully show this in the new RC11
http://127.0.0.1/rW.jpg
which & will make the link just to http://127.0.0.1/& instead and get a no page found
-
if the file name in the program is Unicode
then the download page should be in Unicode too
you need to work on that
cause lot of ppl love your program from all over the world ;)
-
Unicode should be used whenever you have a non-ascii filename.
If you have non-ascii filename, you have 2 options
1) use ANSI: only people with your same codepage will see files correctly (mostly people in your country)
2) use UNICODE: anyone who supports unicode will see files correctly, anywhere in the world
that is: unicode is good.
but not everybody supports unicode yet.
the unicode characters in HTML starts with the & symbol and ends with ;
if you see that shit, perhaps your system or font do not support unicode.
your browser should not stop at the & symbol.
what Windows are you using?
what browser?
are you using the default template?
if i copy the URL from IE or Opera, this is what i get
http://koma/¤¤¤å¦r¤å¥ó¦WºÙ.jpg
that's right
i fear i will have to put Unicode as an option.
can someone report his experience with new unicode urls ?
-
have you been to this site?
http://www.delphi-gems.com/
there is a lot of things about Unicode
might be helpful to you?
-
Unicode should be used whenever you have a non-ascii filename.
If you have non-ascii filename, you have 2 options
1) use ANSI: only people with your same codepage will see files correctly (mostly people in your country)
2) use UNICODE: anyone who supports unicode will see files correctly, anywhere in the world
that is: unicode is good.
but not everybody supports unicode yet.
the unicode characters in HTML starts with the & symbol and ends with ;
if you see that shit, perhaps your system or font do not support unicode.
your browser should not stop at the & symbol.
what Windows are you using?
what browser?
are you using the default template?
if i copy the URL from IE or Opera, this is what i get
http://koma/¤¤¤å¦r¤å¥ó¦WºÙ.jpg
that's right
i fear i will have to put Unicode as an option.
can someone report his experience with new unicode urls ?
well i am using Windows XP with MUI
IE 6.0
i have installed ISO10646 fonts for Chinese Traditional
so system or font don't support is not true at all
i just download your rc11 and run it straight away
this >> ¤¤¤å¦r¤å¥ó¦WºÙ << is 7 multi-byte ASCII in Chinese Big5
-
http://fundementals.sourceforge.net/unicode.html
i hope all these will help
-
i will take a look at that
i'm was using delphi standard functions for unicode/utf-8, they should be right
can someone have a look at the output, to see if it is compliant or what?
-
let's start trying http://www.rejetto.com/temp/hfs.exe
I suggest to replace the bad link to the latest rc at the beginning of this topic...
-
I downloaded 1.6 rc11. Thank You!! Im running on windows xp sp1
Before I setup in a directory I cleaned out all the old versions, from the registry also. deleted all the old templates & vfs files.
setup in a clean directory and build a vfs with a user list & a custom template. All works great!!
The problem Im having is when I close hfs and restart I lose all the usernames? how do I save the username/passwrds?
TIA
Sat
-
how do I save the username/passwrds?
TIA
Sat
Menu->Save-options->Auto-save options on exit
-
how do I save the username/passwrds?
TIA
Sat
Menu->Save-options->Auto-save options on exit
Thanks for your reply Rafi, but I have selected this already and lost the username/passwords each time hfs was closed.
Now after reboot and close hfs a few times the usernames/passwords are saved. So its working fine now. I chose save to registry also..maybe this caused the delay in saving the input?
I like the new Icon's :D
-
Ok, I just installed a new drive on my computer. This seems to be giving HFS1.6 rc11 some problems with read access errors. Access violation at address 004D8925 in module 'hfs.exe'. Read or address 0000033C.
It seems to come up after every restart of hfs after creation of a virtual file system for my new D:\
After closing all the read access errors that show up, hfs will load with the proper file system, and fully operational.
http://129.118.196.81:27015/error.jpg
(desktop screenshot of errors)
-
using rc11 on xp pro
when a person is downloading a file
you can see how much time is left
but instead of displaying as 25 minutes
it displays as 12:25:17 AM, for example
if the file has about 7 minutes left
it displays as 12:07:29 AM
-
I have ask someone with more knowlegal about Unicode
but he said that it is not recommended to use Unicode as URL
Just normal URL Encode is enough
-
rc12
unicode is optional, and disabled by default
fixed the "time left" problem
if you get many error dialogs, it is likely the bug is in timerEvent().
are you including the whole drive in the VFS as a real-foder?
-
I am only using a file two directories down in the new d:\ drive, so no... I am not serving my whole drive. The errors that repeatedly pop up are all the same, so it is some sort of perpetual loop, since they will not stop untill I close them all down. Once they are all closed, hfs opens normally.
-
I added just one picture into the HFS
which the file name is in Chinese
but when the Unicode Option is on
it show something like this
http://192.168.1.101/rW.jpg
exactly like this all ""
which is of course not right at all
just URL Encode is like this
http://192.168.1.101/%A4%A4%A4%E5%A6r%A4%E5%A5%F3%A6W%BA%D9.jpg
-
well i have a problem that there is no autokick after some time user idles
am i wrong ?
can it be in next version ?
i was using lates official 1.5g
i ve created http://www.rejetto.com/forum/viewtopic.php?t=1338 separately cause its not about beta ...
-
is it ok now with disabled unicode ?
-
rc13 uploaded
-
i made a benchmark putting \i1386 as real folder
1.6 rc12 served the page in 19" on my pc
1.5g in 11"
WTH!
i found out that string appending was slow, and replaced it with my routines.
1.6 rc14 served in 9"
it seems the last 1.6 build is faster than 1.5
i also added a new template symbol
download it and test it ;)
-
using rc14 in xp pro
i can drag the height of the "info about connections" window
but when i start the program again
it doesn't remember the position
it seems to remember the width of the log window
but not the height of the connections window
there is an entry in the hfs.ini file:
connections-height=56
i can edit the number but it doesn't seem to make any difference
to the size of any window
it always starts with the window the same height
and the next time the configuration is saved
the number is 56 again
maybe this is the way it is supposed to work?
---
the disconnect idle connections feature doesn't remember
the number of seconds you configure either
this feature works well with wget
wget will normally not realize the download has finished
until the server disconnects
you can manually kick the idle wget connection after it has finished downloading
or use this automatic disconnect feature
and wget will realize the download has finished and is happy
-
rejetto it seems that 'connection inactivity timeout' value isnt saved after restart cause it shows empty dialog ;(
or am i wrong ?
-
yeah. defenetly its not saved on quit, i ve checed it on practice :\
but works ok if you write this timeout everytime servers starts
feature request: saving timeout time on quit :D
-
both bugs fixed in rc15
uploaded
-
8O awsome !!!
you re the best mate!
-
rc14:
Tooltip for the file-details is diplayed even if the mouse is NOT on any file, but on the right side of the pane. I think that it should be active only when the mouse is ON the file name. Selecting a file can be done from the right side as well.
-
fixed in next rc
-
rc16 uploaded
-
downloading and testing :!: :P
-
rc17 supports whole units (drives)
-
When loading a new drive letter into HFS and going to the root of HFS, the drive letters are not showing up. If you enter them into the address, the content shows up
Also, HFS used to support network shares in the VFS, but this no longer works. :roll:
-
Hi, Rejetto! Sorry for my bad english..
2 bugs:
1) Realm don't saves after reboot HFS...
2) How i can disable password protection in vfs (on real folders)?..
Thank you!
-
it is fine with disabled unicode, but still what is the problem with the Unicode function?
-
have you think about adding a Encoding option in the HTML page?
like this
<META http-equiv=Content-Type content="text/html; charset=utf-8">
or
<META http-equiv=Content-Type content="text/html; charset=Unicode">
-
I wanted to ask if you can make the following options default when you first run the hfs.exe for the first time as a new user. The reason being that it would make things easier for the first time user.
Start/Exit -
- Reload on startup VFS file Previously open
- Auto-save Vfs on exit.
Maybe make it Auto save the first file to "Vfs1.vfs", that way the new user will not have to worry about saving or stuff like that the first time they use this program. Saving that file should be saved to the default directory that Vfs.exe is located.
- Save option to file.
This will prevent a newbi from trying to write to the registry if your running hfs.exe from another machine. That way if a person uses the program in their home, then they can use the write to registry option. Basically for the not so new user.
This would make the experience using hfs simpler and more enjoyable. This is from the point of view of a new user. Im just thinking of the others that might try this prgram for the first time. Hope you take these into consideration when you have time.
-
326 Posted: Wed Mar 03, 2004 8:25 pm Post subject:
--------------------------------------------------------------------------------
it is fine with disabled unicode, but still what is the problem with the Unicode function?
326 - what issue were you responding too in this post?
Anyone have any ideas on the issue that I had posted earlier on network and local drives?
-
1) Realm don't saves after reboot HFS...
fixed in rc18
2) How i can disable password protection in vfs (on real folders)?..
just reset the user/password fields
-
it is fine with disabled unicode, but still what is the problem with the Unicode function?
i don't know, it works to me
i don't understand why your IE6 do not understand unicode html entities
<META http-equiv=Content-Type content="text/html; charset=utf-8">
AFAIK, this information describes the way the text is saved in the file.
i'm using ascii chars to describe unicode symbols to your browser, i think your browser is able to read simple ascii. this should not be the problem.
when i write &# 3000; (with no space in between) your browser should display the unicode symbol having code 3000, that is a weird symbol i never saw before :) ...this one: ஸ
-
Anyone have any ideas on the issue that I had posted earlier on network and local drives?
i still don't know why, but the delphi function findfirst() is not working on network paths
i made few tests
-
Start/Exit -
- Reload on startup VFS file Previously open
- Save option to file.
ok for these, but i still do not agree with the autosave
-
HFS used to support network drives, correct?
I'm not sure what version it was but it used to work.
-
it would be a useful information
-
Start/Exit -
- Reload on startup VFS file Previously open
- Save option to file.
ok for these, but i still do not agree with the autosave
Ok! 2 out of three sounds good. Thank you!
-
I wanted to ask if you can make the following options default when you first run the hfs.exe for the first time as a new user. The reason being that it would make things easier for the first time user.
Start/Exit -
- Reload on startup VFS file Previously open
- Auto-save Vfs on exit.
Maybe make it Auto save the first file to "Vfs1.vfs", that way the new user will not have to worry about saving or stuff like that the first time they use this program. Saving that file should be saved to the default directory that Vfs.exe is located.
- Save option to file.
This will prevent a newbi from trying to write to the registry if your running hfs.exe from another machine. That way if a person uses the program in their home, then they can use the write to registry option. Basically for the not so new user.
This would make the experience using hfs simpler and more enjoyable. This is from the point of view of a new user. Im just thinking of the others that might try this prgram for the first time. Hope you take these into consideration when you have time.
Nice ideas! I especially like the Save to file idea on default. This keeps the computer registry "clean" by default, and deleting the whole HFS folder deletes the whole program. Which is what most people want.
-
anybody noticed a bug that when going 4 or more directories deep that you can't use the Up link anymore - results in a 404? using the browser back button to go to level 3 or up and then use the UP link it works fine
btw, using IE6 and real folders with user access enabled on them if it matters
is there any option for the vfs to re-read it's physical data - I mean if I add some stuff to the folders and the VFS does not show them - how do I refresh them?
lastly :) any news on when version 2 with upload is planned?
I love HFS and really appreciate the work done
-
When loading a new drive letter into HFS and going to the root of HFS, the drive letters are not showing up. If you enter them into the address, the content shows up
Any reason why a new drive letter isn't showing up in HFS.
I add 3 new drive letters, 2 being local drives and 1 being a network mapped drive. One odf teh local drives (C:) is shoing up but the other 2 are not. I i type in teh address of the drives in the address bar, i get the content.
-
is there any option for the vfs to re-read it's physical data - I mean if I add some stuff to the folders and the VFS does not show them - how do I refresh them?
Good idea! may be add support for F5 (refresh) and may be an extra option to auto-do this every XXX seconds ?
-
Hi, Rejetto!
Please, add option:
In VFS - (right click on folder/place) - Access for users - All
For add access for all active users by one click...
Thank you! :)
-
anybody noticed a bug that when going 4 or more directories deep that you can't use the Up link anymore - results in a 404?
f
ixed in rc19
is there any option for the vfs to re-read it's physical data
real folders aim to that.
or are you asking for a re-load of virtual folders?
lastly :) any news on when version 2 with upload is planned?
no plan
any reason why a new drive letter isn't showing up in HFS.
fixed in rc19
In VFS - (right click on folder/place) - Access for users - All
ok
-
real folders aim to that.
or are you asking for a re-load of virtual folders?
Yeah I know, however sometimes you'd want the VFS functionality and I did not find a way to refresh the data (file list, folder list, sizes etc) in the vfs except by deleting and re-adding it
real folders work fine but some right click option to re-read the VFS would be great
keep up the good work rejetto
-
If I remember correctly, rejetto, you identified real folders by the "purple" color and virtual - yellow (which I thing should be visa-versa... ;) )
1. I suggest to do the same for the symbol of a whole drive.
2. Can you double check - if they are not created wrong ? all subfolders are not created if "real" is selected, is it right ?
-
Hi, Rejetto! Big thanx for rc19 with "All" in Access! Fast work!.. :D
1 minor bug: I can't see in the IE the connected network drives though they are connected as real folders and are visible in VFS.. :(
You will correct? ;)
-
1 minor bug: I can't see in the IE the connected network drives though they are connected as real folders and are visible in VFS.. :(
You will correct? ;)
It looks fine using F9 on my PC...
-
hm... It really works in WinXP, but don't works in Win2k.. May be it's network settings? I'm sorry, what is F9? :)
-
hm... It really works in WinXP, but don't works in Win2k.. May be it's network settings? I'm sorry, what is F9? :)
F9 = right-click->Browse-it
-
ok... i'm wating for the monday.. then i will test this option on my W2k PC.. but.. hmm.. i'm wating for the monday.. :)
-
What do you think about mini web-interface?.. It will be cool for change access options, add new users, look up logs/statistic downloads/connections, etc... It's really?
-
Auto-thumbnails for jpeg in real folders - it will be really? Or it's very hard and will be plugin only?.. :)
-
testing rc 19 now .... no bugs found ... great work
-
If make autosave logs in file (txt), then add this file in real folder with Admin access...... ? this will be instead web-interface for logs???
Sorry for my bad english! :roll:
-
Hi, Rejetto! Big thanx for rc19 with "All" in Access! Fast work!.. :D
rc19 is smoooooth -This is a nice feature to add all users.
BIG THANKS Rejetto!!!!
-
Hi, Rejetto!
It is possible to add in HFS "favicon" support?
This will be cool option!!! ;)
-
just drag the favicon.ico file to the virtual file system window
-
favicon don't works.. HFS port=2xxx, favicon.ico moved in VFS main directory... with access for All users... hide mode or other mode.. but favicon.ico don't work.. :cry:
-
Does the URL encode in Unicode or UTF-8?
-
Wow! Favicon works! just add new MIME in hfs.ini (by hands in Notepad)! super good! i love HFS! :D
Why MIME don't changes over Menu :?:
-
all i have to do is add the favicon.ico file to the root of the vfs
Firefox browser shows favicons by default
it asks hfs for the ico and hfs sends it
from my hfs log:
Requested GET /favicon.ico
Fully downloaded
Served 3638 bytes
Firefox shows the favicon in the address bar and the window tab
---
another tip:
i save the hfs configuration to the hfs.ini file
i can have 2 or more versions of hfs in different folders
each with it's own configuration
so if i can have a different virtual file system for each one
i can setup one version with no virtual file system
if you put a shortcut to that version in your SendTo folder
you can right-click a file or folder and send it to hfs
and hfs will startup with that file or folder ready to be shared
-
web-interface and thumbnails are already in to-do
i don't know why drives were not working
i rebuilt HFS and now they work, i don't remember what i changed in the source
Does the URL encode in Unicode or UTF-8?
Unicode is used for URLs in HTML, while browsing.
UTF-8 is an encoding for unicode.
Unicode is a characters table. It has nothing to do with bytes.
UTF-8 is a specific code, to write unicode in bytes.
Unicode can be written in several ways, but the "table" is always the same.
HTML has its own way to write unicode, different by common ones (UTF-8, UTF-16, etc).
You can find how it does in any HTML reference.
this is what i know, but i may be wrong
just add new MIME in hfs.ini (by hands in Notepad)!
what type did you add?
Why MIME don't changes over Menu :?:
what?
you can right-click a file or folder and send it to hfs
and hfs will startup with that file or folder ready to be shared
that's what shell context menu options do
but you can do it with the "send to" also
-
I think it might work for some browser, but I think that others browsers might fail to phrase favicon.ico correctly if HFS sends the file as an attachment instead of sending it directly.
-
as an attachment??
-
if you have problems with units (drives) then please download rc20
i think this rc20 should be the last one
-
in MIME types need to add:
*.ico --- image/x-icon
Thanx, Rejetto!
-
Please, Rejetto: icons don't saves in Menu->Icon after HFS reload :(
Please, fix it in new rc :)
-
and, please, add option in Menu->Access for users : Nobody :)
for remove access All by one click..
biggg thank you! ;)
-
@Rejetto - u have a small bug in the VFS tree- related to hard drives:
If you press the - near a directory - it expands it down, and the
- sign is "staying" in the same place it was. This way it it easy to collaps it.
When u do the same to a hard-drive - the - "jumps" to the top of the screen/pane. I think it should behave the same as for a regular directory...
-
"ico mime" added by default
access for users -> NONE added
RAFI:
the behaviour you described is the way folders behave too.
and it is nothing i control.
if you want to test:
blank vfs
press INS 10/20 times (it creates new folders)
scroll the VFS to the top
collapse the first folder
expand the first folder
-
RAFI:
the behaviour you described is the way folders behave too.
and it is nothing i control.
Yep, you are right! my mistake ...:#)
-
"ico mime" added by default
access for users -> NONE added
hmmm... where added? in rc21? ;)
19.03.2004 link=rc20 :)
pls, Rejetto..:)
-
Hi, Rejetto..:)
in rc20 after some downloads/connections appears text errors:
(error - window title)
Access violation at address 004049D4 (may be other) in module "hfs.exe". Read of address FFFFFFF9 (may be other)
&
(HFS 1.6 rc20 - window title)
Invalid pointer operation
Please, fix it..:) (i test rc20 on 2 computers - with WinXPpro and Win2k)
Thank you! :)
P.S. (already DELETE options from Menu and Save anew in file... don't helps.. :( )
-
no its defenetly not the last one
after moving HFS from one location to another (to the system partition) i always get some eroor when application starts so i must click ok ok ok ok ... look
fix this plz
(http://dnb.fromru.com/rc20.png)
-
hmmm... where added? in rc21? ;)
nope, in rc20
to see the new MIME default setting you should delete your MIME setting (remove the line in your hfs.ini)
HFS won't overwrite your setting each new version ;) [unless a bug does it]
-
hmmm... where added? in rc21? ;)
nope, in rc20
to see the new MIME default setting you should delete your MIME setting (remove the line in your hfs.ini)
HFS won't overwrite your setting each new version ;) [unless a bug does it]
This gives me an idea - add "re-set all to defaults" to one of the menus - to return to your install defaults (with a big warning ... ;) ).
I must say, that personally - I never use an option like that, but maybe for special upgrade cases...
-
what about my bug ? any commets or fixes ?
-
what about my bug ? any commets or fixes ?
no idea on how reproduce that
rafi, the reset is already there: just hold SHIFT while HFS starts
-
rafi, the reset is already there: just hold SHIFT while HFS starts
OK, I remember new... :#) May be you better put it in the documentaion, so people will know... :)
-
:( "Range check error" on each start HFS, and Access for users -> NONE - nowhere in rc20.. :cry:
Pls, help, Rejetto ! ;)
-
... and i use Arles Image Web Page Creator with HFS for review my internet jpeg galleries.. each my gallery haves tumbnails.. it's super!
but.. open each tumbnail count in HFS main tray icon as new download..
it's no good.. :)
help me, Rejetto! ;)
pls, add filter (jpg, and other) also for main tray icon :)
-
same here only on startup.
(http://dnb.fromru.com/rc20.png)
Then all is good. :D
Thank you rejetto
-
yeah. not only me getting this mistake ... i ve fucked quite big time to remove it ... and no results ...
fuck this bug! :D
-
i was not able to reproduce it yet
-
:roll: 0kay ... i'm calmist :D
-
... and i use Arles Image Web Page Creator with HFS for review my internet jpeg galleries.. each my gallery haves tumbnails.. it's super!
but.. open each tumbnail count in HFS main tray icon as new download..
it's no good.. :)
help me, Rejetto! ;)
pls, add filter (jpg, and other) also for main tray icon :)
I downloaded arles 5.2.8 and set it up. its a nice program.
One thing I noticed is the gallery created with arles always opens a new window when you click on a thumb and it doesnt re-use the windows.
-
I don't know..:)
My image opens in one window..:)
Arles - rulezzz!..;)
-
no idea on how reproduce that
Save VSF file then: apply that option:
Start/Exit menu" Reload on startup VSF file previously open"
Exit then start HFS & than error should popup.
It did for me!
-
it didn't for me :(
anyway, i never used any automated tool for memory leaks and other things... i sometimes tried to, but was never able to get those tools working :)
-
Is 1.6 coming :?: 8O
Don't warry, between 1.6 and 2.0 you can still squeeze in 1.7, 1.8, 1.9, 1.9.1, 1.9.9.1... ;) :D
I suggest to go-ahead and publish it, so people can get it easily...It is quite stable!
May be an updated help-file/on-line-html with ALL the currently available options and how to use them - can be included as well. It can be used both on your site as well as internally in the local user's VFS (add F1 and/or menu->help->local-help
-
well... i asked kirys for that tool i was talking about
i now got a [DEBUG] version of HFS (1.6 rc20)
it display a very useful information about some errors
it generates a log
please use it and report the bug log
as always, www.rejetto.com/temp/hfs.exe
-
no thx its not final at all.
rejetto try to remove old dir and create some dir in other place -> then place exe there start .... cfg (add something to vfs etc) .... close .... start again .... and there are you go! the mistake should appear
-
contact me on icq suicide!
-
thank you suicide
we fixed the bug :D
rc21 is online
-
well, i was watching another submitted bug
- networked paths do not work
i tested them now with rc21, and they works fine
can someone report his experience?
-
i test rc21 on Win2k (&XP)...
win or hfs creates file:
ExceptionsLog.txt
this text from that file:
############# ERROR ON: 01.04.2004 12:02:42
D:\...\...\hfs.exe
Access violation at address 004DFCA9 in module 'hfs.exe'. Read of address 0100F954
----------------------------------------------------------------
Stack list, generated 01.04.2004 12:02:38
[004DFCA9]{hfs.exe }
[0040413F]{hfs.exe }
[004E5B29]{hfs.exe }
[004E5B92]{hfs.exe }
...
very many
...
[00455482]{hfs.exe }
[004556A2]{hfs.exe }
[004ED3F8]{hfs.exe }
----------------------------------------------------------------
System : Windows 2000 Professional, Version: 5.0, Build: 893, "Service Pack 2"
Processor: Intel, Celeron, 1000 MHz MMX
Display : 1024x768 pixels, 24 bpp
----------------------------------------------------------------
List of loaded modules:
[00400000] D:\Software\httpServer\hfs.exe
Build: 0
...
Product Versions
hfs.exe: Build: 0 31.03.2004 20:07:42
### END LOG
This is old bug? :cry:
-
to last:
i think you re using wrong hfs exe
http://www.rejetto.com/temp/hfs.exe
you must use this one the RC is now debug version
to rejetto:
no problem man, you re always welcome. im happy i can help you :D
-
sorry neoj, but that EXE was not good, and the log you posted is not useful.
please re-download the new exe. the correct (new) size is 1283584 bytes.
this new kind of big exe files will tell me the source and the line where the error lies. so i can fix bug more easily.
please re-report the bug using this exe.
-
Please, Rejetto :)
############# ERROR ON: 02.04.2004 10:29:54
D:\...\...\hfs.exe
Access violation at address 00403C34 in module 'hfs.exe'. Read of address 00004C38
----------------------------------------------------------------
Stack list, generated 02.04.2004 10:29:51
[00403C34]{hfs.exe } System.TObject.Free + $8
[0040413F]{hfs.exe } System.@HandleAnyException + $33
[004E5B21]{hfs.exe } main.TmainFrm.timerEvent (Line 3022, "main.pas" + 1) + $0
[004E5BA1]{hfs.exe } main.TmainFrm.timerEvent (Line 3045, "main.pas" + 24) + $3
[00442DB7]{hfs.exe } ExtCtrls.TTimer.Timer + $F
[00442C9B]{hfs.exe } ExtCtrls.TTimer.WndProc + $2B
[004267B0]{hfs.exe } Classes.StdWndProc + $14
[0043103E]{hfs.exe } Contnrs.TObjectList.GetItem + $A
[0045544B]{hfs.exe } Forms.TApplication.ProcessMessage + $83
[00455482]{hfs.exe } Forms.TApplication.HandleMessage + $A
[004556A2]{hfs.exe } Forms.TApplication.Run + $96
[004ED3F0]{hfs.exe } hfs.hfs (Line 43, "C:\code\mine\hfs\hfs.dpr" + 7) + $7
----------------------------------------------------------------
System : Windows 2000 Professional, Version: 5.0, Build: 893, "Service Pack 2"
Processor: Intel, Celeron, 1000 MHz MMX
Display : 1024x768 pixels, 24 bpp
----------------------------------------------------------------
List of loaded modules:
[00400000] D:\...\...\hfs.exe
Build: 0
...
...
----------------------------------------------------------------
Product Versions
hfs.exe: Build: 0 02.04.2004 10:25:16
### END LOG
-
well, since i cannot reproduce the bug, i tried to fix the bug using the log anyway.
please test rc22 and let me know...
-
i test rc22 :cry:
############# ERROR ON: 02.04.2004 16:25:56
D:\...\...\hfs.exe
Access violation at address 00403C34 in module 'hfs.exe'. Read of address 00004C38
----------------------------------------------------------------
Stack list, generated 02.04.2004 16:25:54
[00403C34]{hfs.exe } System.TObject.Free + $8
[0040413F]{hfs.exe } System.@HandleAnyException + $33
[004E5B65]{hfs.exe } main.TmainFrm.timerEvent (Line 3031, "main.pas" + 10) + $0
[0040EBFC]{hfs.exe } SysUtils.FreeAndNil + $8
[004E5BC9]{hfs.exe } main.TmainFrm.timerEvent (Line 3047, "main.pas" + 26) + $3
[00442DB7]{hfs.exe } ExtCtrls.TTimer.Timer + $F
[00442C9B]{hfs.exe } ExtCtrls.TTimer.WndProc + $2B
[004267B0]{hfs.exe } Classes.StdWndProc + $14
[0043103E]{hfs.exe } Contnrs.TObjectList.GetItem + $A
[0045544B]{hfs.exe } Forms.TApplication.ProcessMessage + $83
[00455482]{hfs.exe } Forms.TApplication.HandleMessage + $A
[004556A2]{hfs.exe } Forms.TApplication.Run + $96
[004ED47C]{hfs.exe } hfs.hfs (Line 43, "C:\code\mine\hfs\hfs.dpr" + 7) + $7
----------------------------------------------------------------
System : Windows 2000 Professional, Version: 5.0, Build: 893, "Service Pack 2"
Processor: Intel, Celeron, 1000 MHz MMX
Display : 1024x768 pixels, 24 bpp
----------------------------------------------------------------
List of loaded modules:
[00400000] D:\...\...\hfs.exe
Build: 0
...
----------------------------------------------------------------
Product Versions
hfs.exe: Build: 0 02.04.2004 16:22:26
### END LOG
but!.. Server don't crash! Error message only ;)
You'll kill this bug, Rejetto :)
-
i dunno why hfs sends data like this
(http://www.dnb.fromru.com/1460.png)
but pc is not feeling ok during anyone is leeching even on 30 kb/sec
(http://www.dnb.fromru.com/99cpu.png)
any suggestions ?!?!?! wtf is this ?
-
suicide:
log menu :arrow: log what :arrow: bytes sent
this options is there mostly for debug purposes
-
neoj, another attempt to fix that bug is in rc23.
i also changed the code handling the quit, because i noticed it was preventing the system from shutting down.
and introduced an option "log on video" so you can disable it.
it is useful when you have a big log and want it only on file, because it eats your memory.
the log can grow big because it is detailed or because HFS stays open for days.
as you may see, the test version of HFS is much bigger.
this is because the file is uncompressed.
the compression (UPX) makes the debug-log to not work.
so i have to ZIP it...
www.rejetto.com/temp/hfs.zip
-
thx for reply rejetto
must be ok now
-
this is what i see on first start of rc23
Access violation at address 004E032D in module 'hfs.exe'. Read of address 000000A0
HFS 1.6 rc23
----------------------------------------------------------------
Stack list, generated 04.04.2004 13:25:52
[004E032D]{hfs.exe } main.doLog (Line 1754, "main.pas" + 6) + $24
[0040413F]{hfs.exe } System.@HandleAnyException + $33
[004E0C7B]{hfs.exe } main.TmainFrm.httpEvent (Line 1900, "main.pas" + 6) + $1
[004C4EE0]{hfs.exe } HSlib.ThttpSrv.Notify (Line 549, "..\hslib\hslib.pas" + 0) + $10
[004C4BB1]{hfs.exe } HSlib.ThttpSrv.Start (Line 462, "..\hslib\hslib.pas" + 9) + $B
[004E253F]{hfs.exe } main.TmainFrm.startServer (Line 2412, "main.pas" + 8) + $5
[004E2478]{hfs.exe } main.TmainFrm.toggleServer (Line 2400, "main.pas" + 3) + $2
[004E238E]{hfs.exe } main.TmainFrm.toggleBtnClick (Line 2389, "main.pas" + 1) + $2
[0046593C]{hfs.exe } Controls.TControl.Click + $64
[0049DAEC]{hfs.exe } ComCtrls.TToolButton.Click + $0
[00465D92]{hfs.exe } Controls.TControl.WMLButtonUp + $5E
[004657A4]{hfs.exe } Controls.TControl.WndProc + $188
[00428CE7]{hfs.exe } Graphics.TFont.GetHandle + $183
[00468747]{hfs.exe } Controls.TWinControl.WndProc + $157
[004A1C69]{hfs.exe } ComCtrls.TToolBar.WndProc + $231
[00465574]{hfs.exe } Controls.TControl.Perform + $24
[004685DC]{hfs.exe } Controls.TWinControl.IsControlMouseMsg + $80
[0049F6E7]{hfs.exe } ComCtrls.TToolBar.UpdateButtonState + $53
[004686CA]{hfs.exe } Controls.TWinControl.WndProc + $DA
[00403DC6]{hfs.exe } System.@IsClass + $E
[0049F71D]{hfs.exe } ComCtrls.TToolBar.UpdateButtonStates + $29
[004A1C69]{hfs.exe } ComCtrls.TToolBar.WndProc + $231
[004683C4]{hfs.exe } Controls.TWinControl.MainWndProc + $2C
[004267B0]{hfs.exe } Classes.StdWndProc + $14
[004311D2]{hfs.exe } Contnrs.TComponentList.GetItems + $A
[0045544B]{hfs.exe } Forms.TApplication.ProcessMessage + $83
[00455482]{hfs.exe } Forms.TApplication.HandleMessage + $A
[004556A2]{hfs.exe } Forms.TApplication.Run + $96
[004ED4E5]{hfs.exe } hfs.hfs (Line 43, "C:\code\mine\hfs\hfs.dpr" + 7) + $7
----------------------------------------------------------------
System : Windows XP Professional, Version: 5.1, Build: A28, "Service Pack 2, v.2096"
Processor: Intel, Pentium 4, 1820 MHz MMX
Display : 1280x1024 pixels, 16 bpp
----------------------------------------------------------------
List of loaded modules:
-
and i just cant make the server go online.... when im trying to make server online pressing on the known button it gives me this log :
Access violation at address 004E032D in module 'hfs.exe'. Read of address 000000A0
HFS 1.6 rc23
----------------------------------------------------------------
Stack list, generated 04.04.2004 13:29:51
[004E032D]{hfs.exe } main.doLog (Line 1754, "main.pas" + 6) + $24
[0040413F]{hfs.exe } System.@HandleAnyException + $33
[004E0C7B]{hfs.exe } main.TmainFrm.httpEvent (Line 1900, "main.pas" + 6) + $1
[004C4EE0]{hfs.exe } HSlib.ThttpSrv.Notify (Line 549, "..\hslib\hslib.pas" + 0) + $10
[004C4BB1]{hfs.exe } HSlib.ThttpSrv.Start (Line 462, "..\hslib\hslib.pas" + 9) + $B
[004E253F]{hfs.exe } main.TmainFrm.startServer (Line 2412, "main.pas" + 8) + $5
[004E2478]{hfs.exe } main.TmainFrm.toggleServer (Line 2400, "main.pas" + 3) + $2
[004E238E]{hfs.exe } main.TmainFrm.toggleBtnClick (Line 2389, "main.pas" + 1) + $2
[0046593C]{hfs.exe } Controls.TControl.Click + $64
[0049DAEC]{hfs.exe } ComCtrls.TToolButton.Click + $0
[00465D92]{hfs.exe } Controls.TControl.WMLButtonUp + $5E
[004657A4]{hfs.exe } Controls.TControl.WndProc + $188
[00428CE7]{hfs.exe } Graphics.TFont.GetHandle + $183
[00468747]{hfs.exe } Controls.TWinControl.WndProc + $157
[004A1C69]{hfs.exe } ComCtrls.TToolBar.WndProc + $231
[00465574]{hfs.exe } Controls.TControl.Perform + $24
[004685DC]{hfs.exe } Controls.TWinControl.IsControlMouseMsg + $80
[0049F6E7]{hfs.exe } ComCtrls.TToolBar.UpdateButtonState + $53
[004686CA]{hfs.exe } Controls.TWinControl.WndProc + $DA
[00403DC6]{hfs.exe } System.@IsClass + $E
[0049F71D]{hfs.exe } ComCtrls.TToolBar.UpdateButtonStates + $29
[004A1C69]{hfs.exe } ComCtrls.TToolBar.WndProc + $231
[004683C4]{hfs.exe } Controls.TWinControl.MainWndProc + $2C
[004267B0]{hfs.exe } Classes.StdWndProc + $14
[004560E1]{hfs.exe } Forms.TApplication.StopHintTimer + $15
[0045544B]{hfs.exe } Forms.TApplication.ProcessMessage + $83
[00455482]{hfs.exe } Forms.TApplication.HandleMessage + $A
[004556A2]{hfs.exe } Forms.TApplication.Run + $96
[004ED4E5]{hfs.exe } hfs.hfs (Line 43, "C:\code\mine\hfs\hfs.dpr" + 7) + $7
----------------------------------------------------------------
System : Windows XP Professional, Version: 5.1, Build: A28, "Service Pack 2, v.2096"
Processor: Intel, Pentium 4, 1820 MHz MMX
Display : 1280x1024 pixels, 16 bpp
----------------------------------------------------------------
-
this new system for debuggin' is excellent
i immediately found the bug and fixed it :)
download rc24 (zip)
-
this new system for debuggin' is excellent
i immediately found the bug and fixed it :)
download rc24 (zip)
thats nice omg 8O 8O :D :D :D
also: the bug is fixed
a final version finally ?!?! :roll: :roll:
-
I just downloaded RC24 and I am still unable to access a network share
-
yes, shared folders were not working as "real folders".
fixed in rc25 www.rejetto.com/temp/hfs.zip
please try it out and let me know
-
so, is the rc25 stable?
i fixed all bugs that has been reported till now
at the moment there is no known bug
it took months, but this is fuck1ng cool :D
-
zip file seems to be broken :(
-
The link works fine! :lol:
-- Update --
Well... I think I was a little to fast.. The link is fine but when I try to unzip the file it just says "unsupported compression method"..
I have tryed with winace, winzip and winrar..
-
ok, redownload now
-
sorry, Rejetto, but... :(
############# ERROR ON: 06.04.2004 20:33:43
D:\...\...\hfs.exe
Access violation at address 004023E3 in module 'hfs.exe'. Read of address B5CF2A74
HFS 1.6 rc25
----------------------------------------------------------------
Stack list, generated 06.04.2004 20:33:41
[004023E3]{hfs.exe } System.SysFreeMem + $B7
[0040413F]{hfs.exe } System.@HandleAnyException + $33
[004E5BEF]{hfs.exe } main.TmainFrm.timerEvent (Line 3030, "main.pas" + 4) + $0
[004010AA]{hfs.exe } System. + $0
[00402789]{hfs.exe } System.@FreeMem + $5
[00404A58]{hfs.exe } System.@LStrClr + $1C
[004055BA]{hfs.exe } System.@FinalizeArray + $4A
[0040555C]{hfs.exe } System.@FinalizeRecord + $20
[0040561F]{hfs.exe } System.@FinalizeArray + $AF
[0040555C]{hfs.exe } System.@FinalizeRecord + $20
[00403CA2]{hfs.exe } System.TObject.CleanupInstance + $12
[00403BE5]{hfs.exe } System.TObject.FreeInstance + $5
[00403FE2]{hfs.exe } System.@ClassDestroy + $2
[004C5475]{hfs.exe } HSlib.ThttpConn.Destroy (Line 699, "..\hslib\hslib.pas" + 7) +
$12
[00403C34]{hfs.exe } System.TObject.Free + $8
[0040EBFC]{hfs.exe } SysUtils.FreeAndNil + $8
[004E5C53]{hfs.exe } main.TmainFrm.timerEvent (Line 3046, "main.pas" + 20) + $3
[00442DB7]{hfs.exe } ExtCtrls.TTimer.Timer + $F
[00442C9B]{hfs.exe } ExtCtrls.TTimer.WndProc + $2B
[004267B0]{hfs.exe } Classes.StdWndProc + $14
[0043103E]{hfs.exe } Contnrs.TObjectList.GetItem + $A
[0045544B]{hfs.exe } Forms.TApplication.ProcessMessage + $83
[00455482]{hfs.exe } Forms.TApplication.HandleMessage + $A
[004556A2]{hfs.exe } Forms.TApplication.Run + $96
[004ED4FD]{hfs.exe } hfs.hfs (Line 43, "C:\code\mine\hfs\hfs.dpr" + 7) + $7
----------------------------------------------------------------
System : Windows 2000 Professional, Version: 5.0, Build: 893, "Service Pack 2"
Processor: Intel, Celeron, 1000 MHz MMX
Display : 1024x768 pixels, 24 bpp
----------------------------------------------------------------
List of loaded modules:
[00400000] D:\...\...\hfs.exe
Build: 0
----------------------------------------------------------------
Product Versions
hfs.exe: Build: 0 06.04.2004 7:06:00
### END LOG
-
Rejetto, may be our problem in my VFS settings?.. :(
-
yes, Rejetto.. i find the problem in this:
example my VFS :
MAIN/PICTURES/ - virtual folders
/NATURE - real folder
full path = MAIN/PICTURES/NATURE/
then my NATURE directory haves subdirectories:
IMAGE
THUMBNAILS
etc
& haves files:
index.html
index2.html
index3.html
when i add filter for NATURE folder:
folder filter = not
files filter = index.html
then i see in my Internet Browser:
MAIN/PICTURES/NATURE/index.html - only
then i click on index.html and load my web gallery with all thumbnails and menus.. good.. but..
in this moment Access Violation appears........
but IF i don't add filters on NATURE i can see all files and folder in NATURE.. it's no good.. but.. :)
IF i don't add filters on NATURE then Access Violation not appears..
it i test today.. what can do?.. ;)
-
ok, redownload now
Yeah! The file is fine now! :P
-
anybody else experience this where user hits are not being added? I am using "HttpFileServer 1.6 rc25 " and i had several people download the same file and the hits still stays blank! I refreshed the page and had users refresh the page it still stayed blank on hits..
Any idea what this could be?
-
Sorry, but I am still not able to access any current network shares in the VFS. I tried to delete the share and readd it but now I am not able to add any shares to HFS
-
gobble, please describe accurately your case, and tell us also the Windows version you use
anybody else experience this where user hits are not being added?
is it on real folders? (red ones)
real folders does not have a counter for files in them.
it is a feature that's already in to-do list.
-
i think rc25 is finall
stop asking stupid questions everything working to my mind :D
-
I have tried it both on Windows 2000 and XP.
I open up my network places through explorer and drag a shared folder (not a mapped drive) from another computer on the network into HFS. I have tried to set it to be virtual and to be real and it shows in HFS fine.
When I open the page, the share shows up but when I click on the link is shows another folder below with the folder name again. If I click on that link, nothing happens.
Suicide, I understand that it might work perfect for you but there is still an issue for some of us. Whether you think my issue is stupid, I don't.
-
stop asking stupid questions everything working to my mind :D
Wait, Moscow! :) A few problems stays in rc25... The sun is yet high ;)
-
neoj, read icq, we have new rc26 to test
well, since i can't reproduce the bug, i have several tests to do, and you will have to do them if you want to see this bug fixed :roll:
-
Rejetto, read my e-mail (about rc26)..
-
neoj, already replied. there's another thing you could do. instead of setting a filter for every folder, just set it for the up-level folder. it is recursive now.
gobble, sorry but shared folders work perfectly to me. i asked a friend to test it, and all went ok. i fear i don't have enough information to solve your problem.
-
I tried running rc 26b. System icons were "gone" (on the HFS server VFS pane). returning to rc25 did not restore them... (Win98) 8O :?:
Edit (11.4):
It happens ONLY when loading (manual or auto) a .vfs configuration file. If you manually drag a new file - it "comes" with the correct icon.
BTW - I think you show remove the "drag files here" tooltip, or at least make a longer time-out for it (to apear only when the mouse "rests" )
-
another small bug -
- put in a file with a long name
- make sure the name is longer then the width of the VFS pane (partly hidden)
- close HFS
- open HFS
the VFS pane is being scrolled to the right and not aligned to the left
-
scroll: i don't know how to fix it. i tried using the delphi scrollBy() method and sendingMessage() but nothing seems to work.
icons: i don't know why, i had no problems, but keep in mind that compatibility with older VFS files is not guaranteed.
tip: just introduced a new option for you to disable them. i don't want to set an higher timeout because it would be higher also for other tips.
in rc27 there is also auto-scroll up/down of the tree, when the mouse is near the border.
i believe the time has come to release it as stable and go on with new features.
-
icons: i don't know why, i had no problems, but keep in mind that compatibility with older VFS files is not guaranteed.
I know, that's why I ran from a new directory, & created a new vfs. Well may be just Win98 problems. Just doublecheck it. it is ONLY when re-reading/loading from a VFS file, not when you drag a file to it. strange...
i believe the time has come to release it as stable and go on with new features
:^: , about time... :) I hope the upload stuff helps a bit... enjoy it !
-
I tried to create a new VFS file and was able to get a little further.
After creating the new VFS file I added a share as virtual and one as real.
The share that was added was the first share and not any folders within the share. The virtual share works but it still shows the share name first
ie. I have a computer named Tiger and I shared my C: drive as C and my D: drive as D
I add the C drive as a real folder and the D drive as a virtual.
In both cases I see the share listed in HFS. If I click on C (real), I should see the folders under C but what I get is another folder "C". If I click on the second C nothing happens. If I click on the D (virtual), I get another folder for D and if I click on that I get the folders under it.
I am also able to share a folder under C as a real folder and that works.
Hope this provided you with more information.
Here is link that you check to see the differences
http://gobble.cjb.net:6000
:? :cry:
-
Get passworded URL doesn't work in HFS 1.6 rc26b?
-
I tried running rc 26b. System icons were "gone" (on the HFS server VFS pane). returning to rc25 did not restore them... (Win98) 8O :?:
Edit (11.4):
It happens ONLY when loading (manual or auto) a .vfs configuration file. If you manually drag a new file - it "comes" with the correct icon.
BTW - I think you show remove the "drag files here" tooltip, or at least make a longer time-out for it (to apear only when the mouse "rests" )
Same problem here.
-
@rejetto - can you tell me what is the latest 1.6 version? you mentions rc 27 ? I cannot locate it... From your download I have rc 26b. Just let us know were is it and what are the latest bug fixes there. Is it published yet ?
-
I think what rejetto means is he is about to release it. :P
-
:cry: :cry: :cry:
shit i cant use hfs anymore coz i got real ip (unfirewalled ip to run identd server witch i need to get on leet ftp sites) and my isp admin said that if i ll run http/ftp/proxy he ll kill me :(((
so im out. sorry
-
Comment (rc26b): The word "Customized Template" shows only "Customized Te" when the toolbar text are long enough. Scrolling doesn't show the whole word. :P
-
:cry: :cry: :cry:
if i ll run http/ftp/proxy he ll kill me :(((
so im out. sorry
the solution is in right in from of you - in your name.... :D :) :o ;)
Why not get free Kerio firewall V2.1.5 and just put it on your PC + change port 80 to something else .
You can get it from here as well:
http://www.freeline.ws/k.phtml?page=2
Edit:
Or you can use the banned IP list for all IPs *.*.*.* + unban only those you permit (actually like a private firewall ...)
-
Rejetto, it seems that HFS does not show banned IPs in the logs, how could I fix that? (So that when a banned IP visits a page, I could see the IP in the log.)
Thanks! :)
-
HFS does not show banned IPs in the logs, how could I fix that?
this is how it was meant to be
to get not annoyed by megalogs
it will be optional in 2.0
hey guys
i guess you did not notice 1.6 has been released as stable (though it is not perfect). stop posting on this topic ;)
-
HFS does not show banned IPs in the logs, how could I fix that?
this is how it was meant to be
to get not annoyed by megalogs
it will be optional in 2.0
hey guys
i guess you did not notice 1.6 has been released as stable (though it is not perfect). stop posting on this topic ;)
No-one has told us :cry: >:(
:^^: :^:
Now you can rename the multi-upload thread "2.0 is comin..."
and review the latest posts there... ;)
-
Since 1.6 is considered stable, should we report bugs in the 2.0 thread or wait until 2.0 is released? :)
-
i just said it is not good to post about 1.6 in "1.6 coming" thread
1.6 has come